FLUID TRANSFER GENERAL CATALOGUE
78Pages

FLUID TRANSFER GENERAL CATALOGUE

Follow us on social media! www.spotify.com/ekin endustriyel

The first condition of innovation is to question. And the first condition of sustainable innovation is to question constantly. The journey of innovation has started with a question for us too: “How can we develop value-added technologies in Turkey?”. First turning point in this long journey was the birth of MIT (Made in Turkey) brand. MIT made us the first plate heat exchanger producer of Turkey and it’s founding vision was not to become a local alternative, it was to build a high-quality brand that can compete on a global level. While we are working towards this goal in the past 15 years,...

PRESSURE VESSELS • Water Heater Tanks • Water Storage Tanks • Buffer Tanks • Expansion Tanks • Stainless Steel Process Tanks • Balance Tanks / Dirt Separators / Air Separators • Vapour Separator • Pressured Air Tanks • Neutralization Tanks • Air Tubes • Steel IBC Tanks with ADR

Lobe Pump Hygienic Centrifugal Pump Acid Pump AIROO Roots Blowers

LOBE PUMP

MIT LOBE PUMPS MIT lobe pumps are valve-free and positive-displacement pumps. Each MIT pump is a special solution. Lobe pumps are fully designed to meet the requirements of applications. Working Principle of MIT Lobe Pumps As the rotor rotates, the volume in the pump inlet line increases and the fluid is dragged into the pump. The fluid remaining between the rotors and the pump inner wall is transported to the pump outlet. These pumps are mainly composed of three or two lobe rotors which rotate from each other within the body. The rotation of the rotor pair can be defined by the direction...

• Easily transfer medium size solids. • There is no friction between the surface materials during the fluid transfer. • The pump can be cleaned while it is connected to the service line. • Quiet operation. • In pumps with optional heating jackets, the flow of fluid through the material is prevented from freezing and provides an easy flow. It transfers smoothly without disturbing the product to be transferred. • Optionally, it can be used in different application areas by making dashboard application on portable wheeled chassis. The only thing to do is to connect the power line to the board...

Motor Series

INFORMATION ON THE WORKING PRINCIPLE As the rotor rotates, the volume in the pump inlet line increases and the fluid is dragged into the pump. Fluid between the rotors and the pump inner wall is transported to the pump outlet. MIT lobe pumps are designed to provide reliable performance, trouble-free operation and superior energy efficiency for demanding applications. These hygienic pumps meet the high standards of low damage to the product and low pressures. MAINTENANCE AND REPAIR Thanks to its compact structure, MIT lobe pumps can be operated in the field and in a very short time and...

HYGIENIC CENTRIFUGAL PUMP

MIT hygienic centrifugal pumps have all the features necessary for the transfer of all liquids in milk, fruit juices, alcoholic and non-alcoholic beverages, beer, pharmaceuticals and chemical industry Made of 304 or 316L quality stainless steel. Thanks to its high wall thickness, it has a long service life against corrosion wear. Thanks to the special design of the lid and fan, friction is reduced and non-hygiene blind spots are eliminated. The convenience of the special structure of the fluid in the pump speed can reach the highest level. In addition, it allows easy control and cleaning...

MIT BLOWERS Blowers are installation equipment that provides the transfer of air in the emitted environment at high or low pressure and rotates the fan with the force received from the motor. The fan in the blowers rotates by vacuuming the air in the suction section, the air trapped inside is then pushed towards the outlet side. Blowers are often used to move air. MIT branded blowers offer the most reliable service for your application areas in terms of size, performance and technology. MIT centrifugal blowers have a maintenance-free, highly efficient fan, electric motor and various...

Single Stage Blowers Single-stage blowers are available in a range of 55-1050 m3/h flow rates, 0-460 mbar pressures and 0.25 to 5.5 kW range of motor power. Double Stage Blowers Double-stage blowers are available in a range of 88-2050 m3/h flow rates, 0-570 mbar pressures and 0,7-25 kw. HOW TO SELECT A BLOWER? The most important information needed for blower selection (for air) is listed as follows. • Air flow rate required (m3/h, Nm3/h). • The positive pressure of the blower to be used for air transfer (such as mbar, bar, mSS). • Vacuum value of the blower to be used for vacuum (mbar, bar,...

WORKING PRINCIPLE OF MIT CENTRIFUGAL BLOWER Blowers increase the pressure of the absorbed gas by a series of vortex motions formed by the centrifugal movement of the impeller. When the impeller is rotating, the channels in the impeller push the air forward by the centrifugal movement and a helical movement occurs. During this movement, the gas is continuously compressed along the channel and the pressure increases linearly. The pressurized air is transferred from the outlet duct of the blower to the installation to be used. WHAT ARE THE BLOWER USAGE AREAS? Blowers are used in various...

MIT DIAPHRAGM TRANSFER PUMPS Diaphragm pumps which work with air can be used in various areas in industrial works. It works as the same principle with lift and force pumps. Diaphragm pumps works with air instead of electricity motors with help of a compression motor that supplies demand of the pumps air according to its own flow rate and pressure values. Due to pumps non-electric motor it has an ex-proof feature. For this reason this pump can serve under oil, solvent and many other flammable material containing work spaces. Besides having deep vacuum and dry working features this pumps flow...

MIT ac diaphragm transfer pumps have muttiple applications which give opportunity to be used at high flow rated and parti-culated fluids. With differing diaphragm adjustments according to flows MIT air diaphragm transfer pumps offers a longer life-time. TECHNICAL FEATURES MATERIAL FEATURES Areas of Usage MIT diaphragm pumps can easily transfer the fluid with connecting to the bottom of the tank. MIT 160 (1/4”) Plastic Pumps Per. Curve 29