PLE
14Pages

free carrying length Lf / (m) PLE CHARACTERISTICS The PLE with aluminum stays is available as PLE with plastic inserts or plastic slot profile, as PLS with foam slot profile or as PLP with plastic divider PZ. positive stay locking both inside and outside radius can be opened simple to shorten or lengthen stepless stay length up to 1000 mm All ekd plastic energy chains are equipped with the integrated connector. Additional components for mounting the energy chain are not required. Travel The maximum travel is determined by the arrangement and the additional weight (line weight). At normal arrangement the maximum travel is twice the free carrying length. Support rollers or similar constructive steps can increase this value. In gliding arrangements travel distances up to 100 meters are possible. Longer travel distances need further constructive steps, like SYSTEM MARATHON, which exceeds the travel distance nearly without limits. APPLICATION AREAS tough PLE max. 6 m free carrying favourable, light PKK max. 5 m free carrying inexpensive, light Kolibri max. 3 m free carrying strong SLE max. 10 m free carrying Travel speed There are no limits for the travel speed in general. But in gliding applications specific influences have to be taken into account. Acceleration In principle there are no restrictions for the acceleration. Limits can only be achieved at high tension forces caused by high additional weights. Temperature The operating temperature is inbetween -20 ° C and 100 ° C. Special versions inner width / (mm) ... all movements ... EX-protection ... antistatic self extinguishing

MARATHON ALLROUND ELTOLA Machine tools, Handling technology, Conveying and lifting equipment Order infos Design guidelines energy drag chains

The usable interior width is stay length - 2 mm 1) stay length + 2l is the outside width, including sliders 2) PLE 328 from R200, PLE 528, 548 from R250 3) weight with stay length 100, values in brackets for closed version 4) 615 a =110 The stay lengths are offered in steps of 1 mm. order example: travel distance 3 m, bending radius 200 mm, cable: 1x15 mm, 8x8 mm, 3x12 mm, 2x22 mm, chain arrangement is hanging PLE 320 / 200 x 2300 / 200 / SD 32, SD 32 / h / 5 PZ, 1 Pt55 type / radius x length / stay length / connectors / arrangement / stay distribution

energy drag chains The PLE (PLE with plastic inserts or plastic insert-profile) ensures a perfect guide at high speeds. Errors during installation of the cables are nearly impossible, with this variation, the hole design of the stays meet exactly the requirements of the lines. Plastic inserts are available in 5 mm steps. The plastic insert-profile can be ordered according to drawing. Order infos Design guidelines PLE energy chains are distinguished from standard plastic chains by their extreme stability and the rigid, continuously adjustable aluminum profile. Stay lengths up to 1000 mm can...

The standard type is build with stays in every second chain link. The integrated connector makes every link in the chain when needed to a connector (not 620) and therefore the separate ordering and storage of end connector brackets is not necessary. order example: radius PLE 221, 321, 521, 541, 611 These designs are made with stays in each link. This increases the lateral stability and improves the guiding particularly of smaller diameter lines. Design guidelines Order infos energy drag chains The closed types with aluminum covers may alsoreplace the standard version stay. The covers can be...

energy drag chains standard type height: inner height: Design guidelines width: inner width: width: inner width: width: inner width: stay in each link height: 100 inner height: 80 width: inner width: width: inner width: Order infos standard type height: inner height: standard type height: inner height: MARATHON ALLROUND ELTOLA standard type height: inner height:

energy drag chains link alu-c-profile sealing bars spreader filler insert damping element plastic vertical divider (PZ) inner cover outer cover Order infos MARATHON ALLROUND ELTOLA

energy drag chains Lengthening or shortening, link bands Design guidelines To shorten the spreaders are disengaged (1), taken from (2,3) and the corresponding piece of chain removed (4). Lengthening is done by adding links and inter-lock with the spreaders. Alternatively, first part of strands assembled or dismantled. Then a stay assembly or disassembly is required. Order infos Stay assembly Stays are installed (1) and locked by horizontal shifting into place (2). Then pushing the sealing bars outside until they lock the link. Stay disassembly Push sealing bar to the inside (4), unlock stay...

Plastic inserts Plastic divider PZ The plastic dividers are hooked into the desired position with the long side of the foot in the aluminum bar and engaged with slight pressure (1). Corrections of the postion by lateral displacement are possible. The dismantling of the PZ is done by pulling in the opposite direction or sideways push out from the stay. The foam insert is pushed laterally into the aluminum-profile (1), before they are assembled to the chain links. Order infos The inserts are assembled according to the required lateral position (1) and inserted into the stay (2). Design...

energy drag chains Design guidelines Face mounting Order infos The energy chain PLE can be optionally fitted with flange connectors. The flange connectors allow various mounting oportunities, mounted like chain links and secured with a stay. Sliders To avoid damage the slider must be conditioned (overnight storage in water at room temperature or 2 h at 80 ° C). The slider is positioned at the inner radius of the energy chain, with the pin in the bore of the stay (1) and pushed until the snap hook locks (2). To dismantle unhinge the snap hook (3) and remove the slider to the top (4). The...

PLE PART NUMBERS inserts special material parts like Ul94 V-0, EX or other have to be named in the order © /-■