Half Mask Polimask 230


Catalog excerpts

Half Mask Polimask 230 - 1

Technical Data Sheet Polimask 230 Order no.: 433 230 Product designation: Half Mask Polimask 230 Applied standard: DIN EN 140 (DIN = German Institute for Standardization) Utilization: In connection with respiratory filter of the series 230 (special thread 95mm) as filtering device. The scope of protection is determines by the product information, technical standards and valid application rules. Description: Faceblank enclose the nose, mouth and chin. Materials: Faceblank Fastener for head harness Head harness Inhalation- and Exhalation valve Exhalation valve fit Exhalation valve cap Filter connector Weight: approx. 145 gram Inhalation resistance: at 30 l/min, constant flow max. 0.5 mbar (EN 140) at 95 l/min, constant flow max. 1.3 mbar (EN 140) at 160 l/min, constant flow max. 2.0 mbar (EN 140) Exhalation resistance: at 160 l/min, constant flow max. 3.0 mbar (EN 140) Marking: Trade mark of manufacturer (LOGO) Product designation Applied standard Manufacture year and -month CE-Identification Notified body Type identifying marking Handling: Take the Half mask from the Packing and/or Storage container directly before use. Use the Half mask in accordance with the instructions. Storage conditions: Ambient temperature. Protect against cold, heat and humidity. Consider conditions noted on the packaging. Warning reference: Please consider the Instructions for use! User references: EKASTU Safety GmbH guarantees the indicated achievement according to class and type. It is to be noted that the laboratory test values can considerably deviate from those which are reached in practice. This can lead to longer or shorter preservation time. The user must read and understand all functional information. In addition, the knowledge of all relevant application rules absolutely necessary (in particular the application rules according to BGR 190 (resp. CEN Report 529 „Respiratory protective devices Recommendations for selection, application, care and maintenance – guide“)). EPDM (Ethylene-Propylene-Diene-Mixture) Polyamide Rubber Rubber Plastic (ABS) Polyethylene Polypropylene TD 433230 English 01-06.10 EKASTU Safety GmbH Gutenbergstraße 75 D-70197 Stuttgart Germany Tel.: Fax: +49/711/263590-0 +49/711/263590-30 info@ekastu.de www.ekastu.de

Open the catalog to page 1

All EKASTU Safety catalogs and technical brochures