EITZENBERGERKINEMATIK MIT LUFT Key Features ■ Slide 90 x 66 mm (l x w) ■ Payload up to 4 kg ■ Incremental Measuring System ■ Dynamic Linear Motor ■ High Positioning Accuracy ■ Compact Design Design and Construction Highly integrated construction and compact design make the axis versatile for high-precision positioning tasks with limited installation space. Despite its compactness, the axis offers good load capacities and tilting moments. It can also be installed in upright position or lying on its side. The linear axis is designed for small to medium-sized strokes with loads up to 30 N. The hard-coated aluminum slide is dynamically driven by a Tecnotion UC3 motor. Preload is achieved by magnet groups. The axis is equipped with an incremental measuring system from Heidenhain (LIK 21). The rail (chrome steel) is available in 2 standard lengths, deviating lengths on request. Applications Inspection technology, non-contact 2D measurement, sensor and camera positioning for inspection, electronics and PCB manufacturing, AOI (automatic optical inspection), automation processes. In general: applications with high demands on dynamics, precision, repeatability, smooth scan movements, short settling times. Drive Control We offer the linear axis EZ-2352-066 with the following drive controllers: ■ Kollmorgen Servostar AKD / S300 / S700 ■ ACS Controller with UDMpa Drive ■ Triamec TSD130 surface requirement

EITZENBERGER KINEMATIK MIT LUFT Specifications Type Unit Stroke Positioning Accuracy uncompensated Repeatability (bidirectional) Position Stability 11 Vertical/Horiz. Straightness (XTZ/XTY) Pitch (XRY) Yaw (XRZ) Max. Speed unloaded Max. Acceleration unloaded Mechanical Data Mounting Position Dimension L x W x H Max. Load 2) Load Capacity vertical (Z) push/pull Load Capacity lateral (Y) Moment of Tilt around Y Moment of Tilt around X Moment of Tilt around Z Moving Mass (slide) Total Mass (incl. slide) Type Sensor Signal Type Intermediate Circuit Supply Continuous Force Peak Force Constant Current...