EZ-0570
2Pages

EITZENBERGERKINEMATIK MIT LUFT Key Features ■ Air Bearing Rotary Table with Direct Drive ■ High Load Capacity ■ Radial Runout < 0.15 pm ■ 1,100 U/min in Standard Version Concept and Design Due to its high load capacity (up to 2,200 N axial/radial), the EZ-0570 rotary stage is particularly suitable for high precission positioning of heavy loads up to 40 kg. Among other applications, the rotary table is preferably used for measuring tasks with non-contact measuring systems. Equipped with a powerful iron-core torque motor, dynamic applications can also be realized. To further reduce axial and radial error motion, the rotary table can also be operated with an ironless motor. The measuring system (Numerik RIK4) with 18,000 lines can optionally be supplied with an interpolation factor of 5, 10, 50 or 100. The rotor is magnetically preloaded, it is clamped to the housing when the air supply is switched off and remains fixed in its position. There are no restrictions with regard to the installation position. Due to the materials used and because air bearings are basically operated without lubricants, the rotary table is suitable for use in clean rooms. Applications High-precision positioning and measuring systems, inspection technology, testing systems, applications with high demands on synchronization and/or repeatability of positioning. Drive Control We offer the rotary table EZ-0570 with the following drive controllers: ■ Kollmorgen AKD P00606

EITZENBERGER KINEMATIK MIT LUFT Specifications Type Mechanical Datal Unit! Valuel Mounting Position Length x Width x Height Moving Mass (rotor) Total Mass Max. Load Capacity axial Nominal Load Capacity axial push/pull Max. Load Capacity radial Nominal Load Capacity radial Stiffness axial Stiffness radial Resistance Against Tilt Max. Moment of Tilt Inertial Moment Material aluminum hardcoat/anodized Encoder Value Type Lines per Revolution Output Signal Interpolation Options Clean Room Suitability applicable Drive Control Standard Kollmorgen AKD P00606 / Servostar S300 1) depending on...