BASICLINE PROGRAM Standard components for pneumatics Pilot operated check valve Throttle with click function Rotary connector AUTOMOTIVE INDUSTRY

Quality solutions - Made by EISELE Over 30 patents, more than 8,000 standard articles, and 2,000 customized solutions impressively underline our top quality performance. Whether the solution is configured from standard components or individually customized: all EISELE products boast convincing quality, long lifetimes and sophisticated technology. Our company is loyal to its philosophy and its roots. The EISELE portfolio is manufactured virtually 100% at our location in Germany. Warehousing directly at the production site enables us to optimally supply our customers, and respond quickly to fulfill...

Content Quality solutions - Made by EISELE Content overview Screw joints with union nut Aluminum black anodized / plastic (brass/plastic) Screw joints with larger nominal width Aluminum black anodized / plastic (brass/plastic) Plug connectors with release sleeve and 1 seal Brass nickel-plated, sealings NBR (Perbunan) Plug connectors with release sleeve and 2 seals Brass nickel-plated, sealings FPM (Viton) Plug connectors with release ring EISELE BASICLINE Brass nickel-plated, sealings NBR (Perbunan) or FPM (Viton) Spigots for PU compressed-air tubes Brass / aluminum black anodized Quick-release...

Quality solutions - Made by EISELE Type 1: Screw joint with union nut The classic connection system for almost all pneumatic applications. - For the safe and tight assembly of compressed air tube - Light in weight but tough in use - No problem with frequent assembly/disassembly or very tight bending radii - Especially suitable for installations affected by vibration - Made of black, deoxidized aluminum - For tube made of PE, PA, PU, PTFE/FEP, textiles or fiber-reinforced PVC Type 2: Screw joint with union nut and larger nominal width The connection system that combines simple handling with the...

Quality solutions - Made by EISELE Type 3: Plug connector The connection system with rugged, proven technology for the fast assembly and disassembly of compressed air tubes in pneumatic installations. - Made of stainless steel, aluminum or nickel-plated brass - For tubes made of PE, PA, PU, PUR or PTFE Type 4: Plug connector with release sleeve The connection systems with special technology for very fast and safe assembly and disassembly of lightweight compressed air tubes. - The collet is positioned in a protective housing in front of the release sleeve - Easy disassembly, even of very dirty...

Quality solutions - Made by EISELE Eisele manufactures and supplies in accordance to the directives 2011/65 / EU (RoHS). Possible exceptions are marked on our documents (order confirmation, delivery note, invoice). Notice: Some of the metal materials we use according to EN can only be compared approximately with the other material standards (USA, Japan). The interchangeability of the compared materials must be considered on a case-by-case basis. In the catalogue bar is used as the unit for the working pressure range. Temperature In the catalogue °C is used as the unit for the working temperature...

Quality solutions - Made by EISELE EISELE GmbH

Quality solutions - Made by EISELE The mounted compressed-air tubes are not to be exposed to tensile loading. 11 In the case of Eisele ProWeld tubes a smaller inside diameter results from a partially larger wall thickness. 2 Important notes for the use of compressed-air tubes made of PTFE (Teflon) and FEP: - The outside diameter of compressed-air tubes must be free of grooves and other damages (e.g. damage from installation tools). - Prior to assembly, use the Eisele tube cutter Art. No. 99605-0014 or Art. No. 99606-0022 to cut compressed-air tubes at a right angle. Ensure that tubes are not...

Quality solutions - Made by EISELE Handling - Screw joints P10 1. Pull union nut over the tube 2. Push tube over tube nipple until it hits the limit stop 3. Tighten union nut by hand Plastic union nuts may also be tightened with an open-ended wrench. The open-ended wrench skips on the union nut to limit torque. Handling - Screw joints P12 1. Push tube into screw joint up to the limit stop 2. Tighten union nut by hand 3. Plastic union nuts may also be tightened with an open-ended wrench. The open-ended wrench skips on the union nut to limit torque. Handling - Plug connector P14, 14a, 15 Push tube...

Quality solutions - Made by EISELE Push tube onto the spigot until it hits the limit stop Pull off tube from spigot Handling - Quick-release couplings P20 Push plug nipple up to the limit stop into the coupling EISELE GmbH Hold plug nipple and push back coupling sleeve

Quality solutions - Made by EISELE 1. Length the tube at a right angle, no loose burrs allowed. Cutting area 2. Unscrew the union nut until the specified value is reached. 3. Push the pipe inside until it stops. Permissible deviations as specified. We can provide the illustrated installation instruction MV2000-1 on your request. EISELE GmbH 4. Tighten the union nut with 60-65 Nm.

Screw joints with union nut Aluminum black anodized/plastic (brass/plastic) Screw joints with union nut 10 Classical connection system - Reliable, robust connection technology - No damage to tube by union nuts Wide range of applications - Suitable for applications with strong vibrations - Secure connection even with strong tube movement Applications with special tubes - Special solutions for the use of fabric tubes or tubes with metal braiding EISELE BASICLINE The standard program already contains an extensive range of types.

Screw joints with union nut 14 Aluminum black anodized/plastic (brass/plastic) Functional principle 10 Hexagon head VS seal rings brass nickel-plated/ elastomer Banjo fittings Aluminum black anodized Union nut PA6 GF, black Compressed-air tube PE, PA, PU, PTFE, FEP or Eisele ProWeld Cylindrical thread VS seal rings brass nickel-plated/ elastomer Service conditions The classical connection system for nearly all applications in pneumatics. Quick assembly and disassembly of compressed-air tubes made of PE (polyethylene), PA (polyamide), PU (polyurethane), PTFE (Teflon)/FEP, ProWeld (PUR) and PVC...