Digital Tension Load Cell Type SOTD

Product catalog summary

Overview: The document describes the Digital Tension Load Cell – Type SOTD, which is designed for heavy-duty applications. It features robust capacitive technology with a patented high-reliability capacitive sensor, offering high tolerance up to 1,000% overload. The load cell is made of stainless steel and sealed to IP67 standards, making it suitable for various challenging environments.

Specifications:

Capacity: 0 to 20,000 kg
Material: Stainless Steel 17-4 PH and AISI 316
Protection: IP67
Overload Tolerance: Up to 1,000%
Operating Temperature Range: -50 to 70°C (up to 100°C with Teflon cable)
Compensated Temperature Range: -10 to 50°C
Supply Voltage: 24Vdc ±10%
Maximum Cable Length: 100 meters

Features:

Pre-calibrated with signal output in kg or N
Calibration independent of cable length
Easy mechanical and electrical installation
Withstands welding voltages and ESD
Replaceable load cell cable

Applications:

Cranes
Tension and force measurement
Offshore/Marine applications
Suspended vessels
Lifts

Options:

Load cell cable lengths of 10, 20, 50, or 100 meters
Customized versions available

Output Options: The load cell supports various communication protocols including Profibus DP, DeviceNet, Modbus ASCII/RTU, EtherCAT, EtherNet/IP, RS232, RS485/422, 4-20mA, and 0-10V dc.

Performance Parameters:

Rated Capacity (Emax): Up to 20,000 kg
Safe Overload Limit: Up to 1,000% of Emax
Safe Sideload Limit: Specified in document
Repeatability, Hysteresis, and Creep: Detailed in percentage of Emax
Deflection at Emax: Specified in document
Measuring Rate: Specified in Hz
Internal Resolution: Specified in bits

Catalog excerpts

Digital Tension Load Cell – Type SOTD 2000 Generation Load Cells Special Features • Robust capacitive technology • Patented high reliability capacitive sensor • High tolerance of up to 1.000% overload • Stainless steel • Sealed to IP67 • Withstands welding voltages and ESD • Cable length up to 100meters • Load cell cable replaceable • Pre-calibrated with signal in kg or N • Calibration independent of cable length • Easy mechanical and electrical installation Applications • Suspended vessels • Offshore/Marine applications • Tension and force measurement • Heavy duty applications Order information SOTD 20.000 Type Capacity Accuracy Options • Load cell cable length 10, 20, 50 or 100meters • Customized versions available

Open the catalog to page 1

Digital Tension Load Cell – Type SOTD Dimensions (mm) 2000 Generation Load Cells Rated capacity (Emax) Safe overload limit Safe sideload limit Minimum dead load Compensated temperature range Measuring rate Operating temperature range Internal resolution 24 Stainless Steel 17-4 PH and AISI 316 6meter standard coaxial RG-58 (Ø6mm) with BNC connector Cable Maximum cable length Output options 100 10 Profibus DP, DeviceNet, Modbus ASCII/RTU, EtherCAT EtherNet/IP, RS232, RS485/422, 4-20mA, 0-10Vdc * higher capacity available on request ** with Teflon cable Next generation digital load cells

Open the catalog to page 2

Digital Tension Load Cell Type SOTD

Digital Tension Load Cell Type SOTD

Catalog excerpts

All Eilersen Electric Digital Systems A/S catalogs and technical brochures