DeviceNet Output Module Type MCE9637

Product catalog summary

Overview: The DeviceNet Output Module Type MCE9637 is designed for interfacing Eilersen digital load cells with a DeviceNet Master device, such as a PLC. It supports up to 8 digital load cells, transmitting individual weight and status data.

Key Features: The module offers plug-and-play installation with pre-calibrated load cells and includes an EDS file for easy setup. It can transmit individual load cell data every 20 to 2000 milliseconds and total system data every 200 milliseconds. FIR filters can be activated for data processing.

Specifications:

Power Supply: 24Vdc ± 20%
Operating Temperature: -30°C to +60°C
Humidity: Up to 90% RH
Communication Protocol: DeviceNet
Connection: 5-pin open connector and ribbon cable for load cell interface
Baud Rates: 125, 250, or 500 kbit/s
Slave Address: Configurable via DIP-switches (0-63)

Installation and Configuration: The module connects to load cells via BNC connectors and uses a ribbon cable for the load cell bus. It is compatible with MCE2010 and MCE9601 modules for power connection.

Software and Customization: Standard software versions are available, and application software can be requested for specific needs. System weight calculations, zeroing, and calibration are performed in the PLC or module, with factors stored accordingly.

Catalog excerpts

DeviceNet Output Module - Type MCE9637 Modules 2000 GenerationLoad Cells 2000 Generation Modules Special Features DeviceNet communication module for interfacing Eilersen digital load cells to a DeviceNet Master device (PLC). The module can be used for up to 8 digital load cells and transmits the weight and status for each individual load cell. The module offers plug-and-play installation with Eilersen pre-calibrated digital load cells and the module is supplied with an EDS file for easy installation. Application software can be made by request. DeviceNet Output Module Ribbon cable for load cell bus DeviceNet BNC connectors for load cells

Open the catalog to page 1

DeviceNet Output Module - Type MCE9637 Dimensions (mm) 21.5 2000 Generation Load Cells 2000 Generation Modules 2000 Generation Modules 2000 Generation Modules Connector for ribbon bus cable Data 2000 generation load cells and modules Application Power Temperature range Communication Protocol DeviceNet DeviceNet slave address is set using DIP-switches (0-63) Slave address Baudrates [kbit/s] 125, 250 or 500 5-pin open connector to DeviceNet (standard DeviceNet connect.) Ribbon cable to MCE2010 load cell interface modules and MCE9601 for power connection Standard Software Versions** Version Measuring...

Open the catalog to page 2

DeviceNet Output Module Type MCE9637

DeviceNet Output Module Type MCE9637

Catalog excerpts

All Eilersen Electric Digital Systems A/S catalogs and technical brochures