Catalogs >
EIDE >
SED

SED
2Pages

Catalog excerpts

TOOTHED CLUTCHESType SED Description The electromagnetic stationary-field toothed clutches type SED are characterised by their small size with relation to their high capacity to transmit torque and by their self-centred field magnet by bearings. By their design, these units do no permit slippage and thus should be selected with an adequate safety margin. Clutch engagement should be carried out while stationary, or at low speeds, depending on the inertia of the systems. The greater the inertia, the slower the engagement can work in any position, as well as in lubricated environments, such as gearboxes, etc. Due to theirspecial design, they require no special maintenance. Applications Coupling mechanisms in all sorts of machines with high torque that require no slippage, little room, etc. and that can be connected when stationary or moving slowly. Assembly They can be fitted to couple two aligned shafts, with an elastic coupling, or to join parallel shafts with sprockets, pulleys, etc. -See assembly examples-. Connect voltage while stationary or moving at a very slow speed

Open the catalog to page 1