TECHNICAL SHEET SAFETY BRAKES Type FPC For lifts, elevators, hoists and other machines Automatic reset The FPC safety brake is a mechanical unit designed to prevent accidental falls in lifting gear motorized by transmission sprockets or rack and pinion devices. The system only operates when the descent rate exceeds a predetermined value. The sensor elements act by the action of Pinion centrifugal force and interlock the follower pinion against the Micro structure of the elevator. The locking occurs in a progressive way. The platform is immobilized after being braked. By actuating the mechanism in the opposite direction to interlock, the brake returns to its original state. For the proper operation of the machine it is essential to analyze the causes that triggered the security system and solve the problem. These safety brakes incorporate a microswitch which operates in the interlocking. This signal can cut the general current of the elevator, activate an alarm, etc. The unit must be firmly attached to the platform structure so that the sprocket is perfectly centered and in engagement with the rack. After mounting the unit, connect the cables to the micro connector. Typically, this is in closed Features FPC safety brakes prevent accidental falls in all types of lifting devices (pinion-rack, drum-wire, etc.). The long experience of our company in security requires us to the realization of the product. The FPC brake is delivered regulated according to the specific characteristics of the machine on which it will be mounted. As ever this should be mounted on a different machine, its traceability must be ensured. The parachute is sealed for safety, preventing the further Compact and robust, they are particularly suitable for installation in wind tower elevators, cranes and other industrial applications. The operation is completely mechanical. No force or external signal is required to work. The system only operates when the descent rate exceeds a predetermined value. The braking starts immediately when the speed is surpassed, immobilizing the platform. Braking occurs Left rack Right rack Automatic reset without manipulation backing to Descending spin Descending spin Counter roller Counter roller The system incorporates a protected inner microswitch which acts at locking. Thus, the signal used to cut the power, trigger an alarm, etc. Blocking directions: clockwise, anticlockwise, and bidirectional. Certified product according to EN 12158, EN12159, EN 1495, 95/16/CE and Rack Electromagnetic, pneumatic brakes and clutches Mechanical safety brakes · Centrifugal brakes Flexible couplings · Torque limiters · Special units

Automatic reset Sizes Also applies to overhead doors, counterweights, palletizers, strapping, squips, retractable baskets, baskets, shelves, etc. Versions Unidirectional ■ Bidirectional ■ Double shaft ■ Special models. Measurements Sizes