HIGH SENSITIVITY PNEUMATIC BRAKES ASSEMBLY EXAMPLES Type FNC Construction 1 Above: adaptation chain sprocket. Below: adaptation pulley. Description The FNC type pneumatic brakes are characterized by high sensitivity response. As radial air feed, not rotary air intake leads. The braking torque is proportional to the air pressure, so that said pressure regulating adequately great control over the torque absorbed by the brake. It is incorporated into the rotor by two bearings set. Under construction 1 has a cylindrical area with axially threaded holes to facilitate the incorporation of a sprocket, pulley, etc. And construction 2 incorporates a flexible coupling which allows to be attached to a shaft with small misalignments. Construction 2 Adaptation to a shaft with elastic coupling, allowing absorb slight angular, linear or combination of both. High sensitivity. Proportion to the pressure. Low inertia. Good heat dissipation. Reduced weight. Axes in different position. Torque according to the working pressure. – Control Systems band tension. – Unwinder for the paper industry, plastics, textile, printing, etc. CHARACTERISTIC CURVE Electromagnetic, pneumatic brakes and clutches Mechanical safety brakes · Centrifugal brakes Flexible couplings · Torque limiters

HIGH SENSITIVITY PNEUMATIC BRAKES Type FNC c/ Conca de Barbera, 8 - Poligono Pla de la Bruguera - 08211 Castellar del Valles - Barcelona (SPAIN) Tel. +34 93 714 65 11 - Fax +34 93 714 57 02 - [email protected] - www.eide.nea