Group: VERDER
Catalog excerpts
Special-Sensors for Automation Capacitive Sensors
Open the catalog to page 1We reserve the right to make technical alterations without prior notice. EGE-Elektronik Spezial-Sensoren GmbH • http://www.ege-elektronik.
Open the catalog to page 2Capacitive Sensors Operating Principal A capacitive proximity switch works with a high frequency oscillating circuit that creates an electromagnetic field on the active sensor surface by means of a capacitor. When a substantial or fluid substance nears this field a capacitance unbalance occurs and leads to a variation of the amplification in the oscillating circuit. If this amplification exceeds a threshold value, a switching signal is generated. Operating Distance The operating distance is the separation of an object from the active sensor surface at which a switching signal is produced....
Open the catalog to page 3Capacitive Sensors Supply voltage The operating voltage is the voltage range in which EGE sensors function safely. For a constant voltage supply it is important to make sure that the limits are still observed when the residual ripple is included. Switching current This current gives the maximum long-term current for the switching output of the sensor at an ambient temperature of 25 °C and ohmic load. At an elevated ambient temperature, the current load capability decreases. For analog outputs, the boundary values given in the appropriate technical data, and particularly the permissible...
Open the catalog to page 4Capacitive Sensors Collocation When collocating the sensors, a minimum separation must be kept between the devices in order to avoid mutual influence. When in doubt, a test should be conducted under application conditions. For flush mounting the lateral separation between two sensors must correspond to at least the diameter of the sensor. For non flush mounting, the lateral separation from each other must correspond to at least twice the diameter of the sensor. For separations greater than eight times the diameter no mutual influence is to be expected. For oppositely mounted sensors, a...
Open the catalog to page 5Capacitive Sensors Standard switches Series KGK Plastic-thread M12x1 DC 10…33 V Installation flush (f) non flush (nf) 10 Operating distance sn [mm] Switching output ID-No. Type Supply voltage [V] Switching current [mA] Short circuit proof Overcurrent release [mA] Reverse protection Voltage drop max. [V] Residual current [mA] Current consumption (not actuated) [mA] Switching frequency [Hz] Ambient temperature [°C] EMC-class Protection [EN 60529] LED display Housing material Connection Accessories (see page 4.28) EGE-Elektronik Spezial-Sensoren GmbH • http://www.ege-elektronik.com Fixing nuts...
Open the catalog to page 7Installation flush (f) non flush (nb) Operating distance sn (Adjustable range) Switching output ID-No. Type Supply voltage [V] Switching current [mA] Short circuit proof Overcurrent release [mA] Reverse protection Voltage drop max. [V] Residual current [mA] Current consumption (not actuated) [mA] Swiching frequency [Hz] Ambient temperature [°C] LED display Housing material Connection Connection diagram fixing nuts are part of delivery EGE-Elektronik Spezial-Sensoren GmbH • http://www.ege-elektron
Open the catalog to page 8Capacitive Sensors Standard switches Series KGK Plastic-thread M18x1 DC 10…55 V Installation flush (f) non flush (nf) LED Pot. Operating distance sn [mm] (Adjustable range) Switching output ID-No. Type Supply voltage [V] Switching current [mA] Short circuit proof Overcurrent release [mA] Reverse protection Voltage drop max. [V] Residual current [mA] Current consumption (not actuated) [mA] Switching frequency [Hz] Ambient temperature [°C] EMC-class Protection [EN 60529] LED display Housing material Connection Accessories (see page 4.29) EGE-Elektronik Spezial-Sensoren GmbH •...
Open the catalog to page 9Installation flush (f) non flush (nf) Operating distance sn (Adjustable range) Switching output ID-No. Type Supply voltage [V] Switching current [mA] Short circuit proof Overcurrent release [mA] Reverse protection Voltage drop max. [V] Residual current [mA] Current consumption (not actuated) [mA] Switching frequency [Hz] Ambient temperature [°C] LED display Housing material Connection Connection diagram Fixing nuts are part of delivery EGE-Elektronik Spezial-Sensoren GmbH • http://www.ege-elektronik.com
Open the catalog to page 10Installation flush (f) non flush (nf) Operating distance sn [mm] (Adjustable range) Switching output ID-No. Type Supply voltage [V] Short circuit proof Overcurrent release [mA] Reverse protection Voltage max. [V] Minimum load current [mA] Current consumption max. [mA] Switching frequency [Hz] Ambient temperature [°C] EMC-class Protection [EN 60529] LED display Housing material Connectiob Connection diagram Fixing nuts are part of delivery EGE-Elektronik Spezial-Sensoren GmbH • http://www.ege-elektronik.com
Open the catalog to page 11Installation flush (f) non flush (nf) Operating distance sn (Adjustable range) Switching output ID-No. Type Supply voltage [V] Short circuit proof Overcurrent release [mA] Reverse protection Voltage drop max. [V] Minimum load current [mA] Current consumption (not actuated) [mA] Switching frequency [Hz] Ambient temperature [°C] LED display Housing material Connection Connection diagram Fixing nuts are part of delivery EGE-Elektronik Spezial-Sensoren GmbH • http://www.ege-elektronik.com
Open the catalog to page 12Installation flush (f) non flush (nf) Connection diagram Mounting clamps 0 20 mm (Z00100) are part of delivery EGE-Elektronik Spezial-Sensoren GmbH • http://www.ege-elektronik.com
Open the catalog to page 13Series KNK Smooth-body switches 034 mm DC 10...55 V Installation flush (f) non flush (nf) Operating distance sn (Adjustable range) Switching output ID-No. Type Supply voltage [V] Switching current [mA] Short circuit proof Overcurrent release [mA] Reverse protection Voltage drop max. [V] Residual current [mA] Current consumption (not actuated) [mA] Switching frequency [Hz] Ambient temperature [°C] LED display Housing material Connection Connection diagram Mounting clamps 0 34 mm (Z00102) are part of delivery EGE-Elektronik Spezial-Sensoren GmbH •...
Open the catalog to page 14All EGE-Elektronik Spezial-Sensoren GmbH catalogs and technical brochures
-
About EGE - Overview
6 Pages
-
Inductive Sensors
72 Pages
-
Level Sensors
40 Pages
-
Flow Sensors
120 Pages
-
Accessories M12 Connector
10 Pages
-
SDNC 500
2 Pages
-
LDS 1000
2 Pages
-
LDV 1000
2 Pages
-
Temperature Sensors
12 Pages
-
AGVU
1 Pages
-
SDN 550
1 Pages
-
SCS 440
1 Pages
-
KBM
1 Pages
-
Serie cfc
1 Pages
-
series DN 752
1 Pages
-
series DGC 075
1 Pages
-
MFP
1 Pages
-
TGBA
1 Pages
-
Serie AGVU
1 Pages
-
Serie HGVH
1 Pages
-
TGM 050 FW T1/T2
1 Pages
-
GK
104 Pages
-
Serie IGEXHa
1 Pages
-
Dust / Gas Series IGEXHa
1 Pages
-
SDNC500
2 Pages
-
SNS 552
2 Pages
-
LDN 1000
2 Pages
-
SDN 500
2 Pages
-
Brochure Pressure-level
8 Pages
-
Level Sensors
46 Pages
-
Inductive Sensors
72 Pages
-
Opto high capacity systems
12 Pages
-
Series MFP
1 Pages
-
Series LDN 1000
2 Pages
-
Metal detectors
8 Pages
-
Pressure/Level
8 Pages
-
Ultrasonic Sensors
9 Pages
-
Infrared detectors
12 Pages
-
demanding environment
16 Pages
Archived catalogs
-
temperature sensors
8 Pages