Product innovation Programmable air flow sensor Series LDN 1000 Easy installation - Accurate measurement ■ Mass flow measurement of air ■ Consumption measurement in compressed air networks ■ Easy configuration via lO-Link interface ■ User levels configurable ■ Manipulation detection Application The LDN 1009 GAPL detects air flow and temperature in compressed air networks. It displays current air consumption of a connected tool or system component in an easy-to-read display and responds quickly to any changes in flow speed. At the same time, the sensor can be used to measure air consumed in standard litres or standard cubic metres. Functions • Displayed measurand and unit of measurement selectable • Configurable outputs • Reference values for standard pressure and standard temperature adjustable • TAG ID programmable and readable on device • IO-Link Device V 1.1 Type LDN 1009 GAPL P11373 • G1/4 • 15 Nm3/h Accessories Mounting plate 72x63x3 Z01217 © IO-Link IO-Link is a point-to-point communication interface include enabling parametrization of sensors and actuators using a PC / Notebook and an interconnected master module. Installation The sensor is inserted inline into the pipe line. Any run-in and run-out distances required result from pipe routes and any existing controls and instruments upstream of the sensor. Operation and display The sensor is parametrized using the front buttons or the IO-Link interface. Its 6-digit display shows the measurement values which can be sent as process data to an PLC via the IO-Link connection. User levels The sensor provides the option to restrict the scope of operation of a user group to the modification of certain parameters. Manipulation detection In a non-resettable modification counter, every reparametrization is registered, regardless of whether it was entered via the device buttons or via IO-Link interface. Manipulations are thus detected quickly and reliably. EGE-Elektronik Spezial-Sensoren GmbH • http://www.ege-elektronik.com

Technical data Detection ranges Air flow Temperature ID-No. Type Flow deviations from measurement value [±%] from measurement range end value [±%] Reproduceability [±%] Temperature deviation 1 [±°C] Supply voltage [V] Current consumption max. [mA] Switching current [mA] Ambient temperature [°C] Medium temperature [°C] Start-up time [s] Reaction time [s] Compressive strength [bar] Sensor material Housing material Display flow Protection [EN 60529] 4 0.5 2 2 PNP-NO/NC, NPN-NO/NC, IO-Link, pulse PNP-NO PNP-NO/NC, NPN-NO/NC, Analog 4...20 mA, reset input for dosage 18...30...