SDNC500

SDNC500

SDNC500

Product catalog summary
Overview
The SDNC 500 sensors with IO-Link function are designed for process monitoring, capable of measuring flow speed and temperature in fluid mediums. Configuration is facilitated through software that connects via an IO-Link/USB master.

Functions
  • Limit value/range value monitoring
  • Analog output
  • Pulse output flow
  • Teach functions
  • Logic linking
  • Switching delay

Types
  • SDNC 502 GAPL: Water-based media, 0.020...0.500 l/min, linearized
  • SDNC 503 GANPL: For all liquid media
  • SDNC 503 GAPL: Water-based media, 0.05...2.00 l/min, linearized
  • SDNC 506 GANPL: For all liquid media
  • SDNC 506 GAPL: Water-based media, 0.10...4.00 l/min, linearized
  • SDNC 508 GANPL: For all liquid media
  • SDNC 508 GAPL: Water-based media, 0.20...8.00 l/min, linearized

Installation
The sensors can be easily connected using the G1/4 thread. A special screw adapter ensures a linear signal and stable construction makes them resistant to moisture and vibrations.

Technical Data
  • Detection range varies depending on the medium
  • Flow and temperature data are provided in specific ranges and resolutions
  • Supply voltage: 18...30 DC
  • Current consumption: ≤40 mA
  • Switching output: 150 mA at 25°C
  • Analog output: 4...20 mA
  • Ambient and medium temperature: 0...60°C
  • Compressive strength: 10 bar
  • Sensor material: AISI 316 Ti
  • Housing material: PBT-GF30
  • Protection: IP 67
  • Connection: M12 connector

IO-Link Specifications
  • Revision: 1.1
  • Baud rate: COM 2
  • Minimum cycle time: 3.50 ms
  • Process data: 4 Bytes

Accessories
  • Cable Mounting bracket
  • IO-Link/USB master set

Contact Information
EGE-Elektronik Spezial-Sensoren GmbH
Tel. +49 (0) 4346 / 41580
Website: www.ege-elektronik.com
Email: [email protected]
See more

Catalog excerpts

SDNC500-1

Product innovations Flow Sensors The smart solution for compact systems ■ Flow and temperature measurement ■ Easy configurable via IO-Link interface ■ Process data can also be used for remote maintenance ■ Analog and switching output in SIO-mode available Application SDNC 500 sensors with IO-Link function are the smart solution for process monitoring. They can measure the flow speed and temperature in fluid mediums. To do so, there is a configuration software which configures the sensors via an IO-Link / USB master. The models ...GAPL provide flow data for water-based mediums as a linear output signal. Hoses and pipe couplings can be easily connected using the G1/4 thread. A special screw adapter shapes the flow profile and provides a linear signal of the SDNC 50X GAPL. The stable construction makes the sensors insensitive to moisture and vibrations. Functions • Limit value / range value monitoring • Analog output • Pulse output flow • Teach functions • Logic linking • Switching delay Types SDNC 502 GAPL SDNC 503 GANPL SDNC 503 GAPL SDNC 506 GANPL SDNC 506 GAPL SDNC 508 GANPL SDNC 508 GAPL water-based media, 0.020...0.500 l/min, linearized for all liquid media water-based media, 0.05...2.00 l/min, linearized for all liquid media water-based media, 0.10...4.00 l/min, linearized for all liquid media water-based media, 0.20...8.00 l/min, linearized 1: USB-connecting cable (to the PC / Notebook) 2: IO-Link-USB-Master 3: Sensor-connecting cable 4: Sensor Application: EGE-IO-Link-System More Information EGE-Elektronik Spezial-Sensoren GmbH Tel. +49 (0) 4346 / 41580 www.ege-elektronik.com [email protected] EGE-Elektronik Spezial-Sensoren GmbH • http://www

 Open the catalog to page 1
SDNC500-2

Screw adapter SDNC... GAPL (part of delivery) G1/4 Technical data Detection range Liquids ID-No. Type Measuring tube 0 D [mm] Process data Flow [Steps] Detection range Water-based media [l/min] Resolution [l/min] ID-No. Type Measuring tube 0 D [mm] Process data Flow [l/min x 0.001] SDNC 503 GANPL SDNC 506 GANPL Supply voltage Current consumption Switching output Analog output Ambient temperature Medium temperature Reaction time 1 Compressive strength Sensor material Housing material Protection [EN 60529] Connection 1 depending on medium and on operation parameters Accessories (Selection) ID-No. Type Design...

 Open the catalog to page 2

All EGE-Elektronik Spezial-Sensoren GmbH catalogs and technical brochures

  1. Flow Sensors

    120  Pages

  2. SDNC 500

    2  Pages

  3. LDS 1000

    2  Pages

  4. LDV 1000

    2  Pages

  5. AGVU

    1  Page

  6. SDN 550

    1  Page

  7. SCS 440

    1  Page

  8. KBM

    1  Page

  9. Serie cfc

    1  Page

  10. MFP

    1  Page

  11. TGBA

    1  Page

  12. Serie AGVU

    1  Page

  13. Serie HGVH

    1  Page

  14. GK

    104  Pages

  15. Serie IGEXHa

    1  Page

  16. SNS 552

    2  Pages

  17. LDN 1000

    2  Pages

  18. SDN 500

    2  Pages

  19. Series MFP

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.