Compact - Fast response - Reliable ■ Monitoring of flow pulses ■ Suitable for short dispensing cycles in minimal lubrications ■ Detects small amounts of dosing quantity ■ Sensitivity adjustable ■ Switching output PNP-NO Mounting Hoses and pipe couplings can be easily connected using the G1/4 thread. The stable construction makes the sensors insensitive to moisture and vibrations. The sensor housing contains three openings for fastening it to a mounting bracket, available as an accessory. Application The SDN 501/1 GSP-DYN is a thermal flow sensor, which detects smallest dispensing volumes. It responds to the set in of the flow of a fluid, for example caused by the actuation of a dosing piston. Features • Sensitivity adjustable by potentiometer • Switch-off delay adjustable by potentiometer up to 10 seconds • LED signal when puls detected • Operation indication with green LED • Usable with many mediums Type SDN 501/1 GSP-DYN P11396 • G1/4 Operation and display The adjustment of the sensor is made after installation in the lubrication system. During operation the setpoint is determined by use of the sensitivity potentiometer. A detected flow pulse is indicated by an output signal which duration can be prolonged up to 10 seconds. EGE-Elektronik Spezial-Sensoren GmbH • http://www.ege-elektronik.com

[mm] Technical data Detection range Media Dosing quantity min. [ml] Repeating time min. [s] Cross section pipe [mm2] Supply voltage [V] Current consumption [mA] Switching current [mA] Ambient temperature [°C] Medium temperature [°C] Time before availability [s] Reaction time [s] Switch-off delay [s] Compressive strength [bar] Sensor material Housing material Display flow Degree of protection [EN 60529] Adjustment of sensitivity Adjustment of switch-off delay Water, alcohol, oil and flowable grease 0.02 1 4 x 1 P11396 SDN 501/1 GSP-DYN PNP-NO, short-circuit...