Pressure/Level

Pressure/Level

Pressure/Level

Product catalog summary
Overview: The document provides detailed information about EGE-Elektronik's pressure sensors designed for automation applications. These sensors are ISO 9001 certified and are used for monitoring pressure levels in pipes and containers, with additional capabilities for fill level monitoring.
Specifications: The sensors feature a compact design, programmable settings, analog output, and two switching points. They are capable of measuring pressure ranges from 0 to 16 bar and can withstand overloads up to 64 bar. The sensors operate on a 24 V DC supply and have a current output of 4 to 20 mA.
Functionality: The sensors use a capacitive ceramic gauge head for high accuracy and stability. They are designed to be installed directly into the wall of a pressure container or pipe, with the medium contacting the sensor's ceramic gauge head directly. The sensors are equipped with a four-digit LED display for pressure value readouts and programmable PNP switch outputs.
Installation and Programming: The sensors require installation with shielded wires and grounding on one side. Programming is facilitated through a keypad with an OK button, arrow button, and +/- button for easy configuration. Default settings are pre-programmed, but users can adjust parameters as needed.
Materials and Resistance: The sensor membrane is made of fluoroelastomer (FPM) and is resistant to various media, including water, aromatic hydrocarbons, acids, and oils. The housing is made of PBT, and the sensor material is AISI 316 Ti.
Additional Features: The document also mentions other types of sensors offered by EGE-Elektronik, including infrared detectors, ultrasonic sensors, level sensors, flow sensors, and temperature sensors, each with specific applications and features.
Contact Information: The document provides contact details for EGE-Elektronik's headquarters and various international distributors.
See more

Catalog excerpts

Pressure/Level-1

Automation evel ure-L Compact model Programmable Analog output Two switching points Level measuring

 Open the catalog to page 1
Pressure/Level-2

Pressure Sensors Technology and application Usage This high performance device monitors pressure levels in pipes and containers. However, the high accuracy of its capacitive ceramic gauge head makes it an effective fill level monitor as well. It can record fill levels with an accuracy of one centimeter in containers that stand five meters tall. Measurement instruments with a 1000 mbar measurement range have proven to be very useful for these types of applications. When measuring the fill level of water, 10 mbar of pressure corresponds to 10 cm water height. The instrument displays the pressure...

 Open the catalog to page 2
Pressure/Level-3

Pressure Sensors Two switching points Series DN 752 Monitoring sensor for gases and fluids Fast and easy programming Two independent switching points 7-segment display Display rotatable Design Sensing range Output ID-No. Type Supply voltage [V] Switching current [mA] Current consumption [mA] Ambient temperature [°C] Medium temperature [°C] Compressive strength [bar] Sensor material Material gauge head Sealing material Housing material Protection [EN 60529] Connection 2 3 48 AISI 316 Ti Ceramic FPM PBT IP 65 M12 connector (1) BN (4) BK Connecting cable Type SLG 4-2 (Z00445) EGE-Elektronik Spezial-Sensoren...

 Open the catalog to page 3
Pressure/Level-4

Pressure Sensors Analog output Series DN 752 Monitoring sensor for gases and fluids Fast and easy programming Analog output model 7-segment display Display rotatable Design Sensing range Output ID-No. Type Supply voltage [V] Current ouput [mA] Load RL [] Current consumption [mA] Ambient temperature [°C] Medium temperature [°C] Compressive strength [bar] Sensor material Material gauge head Sealing material Housing material Protection [EN 60529] Connection 48 AISI 316 Ti Ceramic FPM PBT IP 65 M12 connector L+ Connecting cable Type SLG 3-2 (Z01076) EGE-Elektronik Spezial-Sensoren GmbH • http://www.ege-elektronik.com...

 Open the catalog to page 4
Pressure/Level-5

Pressure Sensors Two switching points and analog output Series DN 752 Monitoring sensor for gases and fluids Linear current output 4...20 mA Two programmable switching points NC/NO programmable Display rotatable Design Sensing range Output ID-No. Type Supply voltage [V] Current output [mA] Switching current [mA] Load RL [] Current consumption [mA] Ambient temperature [°C] Medium temperature [°C] Compressive strength [bar] Sensor material Material gauge head Sealing material Housing material Protection [EN 60529] Connection 64 AISI 316 Ti Ceramic FPM PBT IP 67 M12 connector (1) BN Connection cable...

 Open the catalog to page 5
Pressure/Level-6

Pressure Sensors Switching points and analog output Additional technical data Output analog Linearity Temperature drift Long time drift Influence of supply voltage Input/output resolution Alignment range Adjustment range of damping 4...20 mA 0.2% of maximum value 0.1% / 10 K of maximum value 0.1% / Year of maximum value 0.5% / 10 V of maximum value 16 Bit zero point 0% - 95% / final point 3,3% - 100% 0...30 seconds Switching output S1 / S2 Output voltage Time delay Rise time PNP NO/NC programmable +UB – 1.5 V < 8 ms < 400 μs with RL < 400 or IL > 4.5 mA, respectively Operational and display elements...

 Open the catalog to page 6
Pressure/Level-7

Process Sensors Flow sensors Electronical monitoring of flow ■ Measuring range 1 ml/min...100 l/min Level sensors for Ex-applications ■ For level monitoring in Ex areas ■ With PTFE connector cable Sensors for connection to amplifiers Level sensors ■ Steam proof at a pressure of up to 30 bar ■ For chemically aggressive media Ultrasonic sensors Temperature sensors ■ Compact model with digital display ■ Monitoring in pipes and containers ■ Multi use output NO/NC + analog Infrared detectors Position control EGE-Elektronik Spezial-Sensoren GmbH • http://www.ege-elektronik.com

 Open the catalog to page 7
Pressure/Level-8

Headquarters EGE-Elektronik Spezial-Sensoren GmbH Ravensberg 34 D-24214 Gettorf Tel. +49 (0) 4346 / 41580 Fax +49 (0) 4346 / 5658 Internet: www.ege-elektronik.com EGE-Elektronik ApS Forstallé 79 DK-6200 Aabenraa Tel. +45 70207271 Fax +45 70207272 Stork AS Brynsveien 100 N-1352 Kolsås Tel. +47 67176400 Fax +47 67176401 Cematic-Electric B.V. Postbus 777 NL-7550 AT Hengelo Tel. +31 742433422 Fax +31 742913333 ICM Ital Control Meters Srl Via della Valle 67 I-20048 Carate Brianza (Mi) Tel. +39 0362 8052 00 Fax +39 0362 8052 01 Bibus Spain, S. L. Rua do Arroncal, Vial C – Nave 4A ES-36350 Nigran Tel....

 Open the catalog to page 8

All EGE-Elektronik Spezial-Sensoren GmbH catalogs and technical brochures

  1. Flow Sensors

    120  Pages

  2. SDNC 500

    2  Pages

  3. LDS 1000

    2  Pages

  4. LDV 1000

    2  Pages

  5. AGVU

    1  Page

  6. SDN 550

    1  Page

  7. SCS 440

    1  Page

  8. KBM

    1  Page

  9. Serie cfc

    1  Page

  10. MFP

    1  Page

  11. TGBA

    1  Page

  12. Serie AGVU

    1  Page

  13. Serie HGVH

    1  Page

  14. GK

    104  Pages

  15. Serie IGEXHa

    1  Page

  16. SDNC500

    2  Pages

  17. SNS 552

    2  Pages

  18. LDN 1000

    2  Pages

  19. SDN 500

    2  Pages

  20. Series MFP

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.