Level Sensors

Level Sensors
1 / 40 PagesView full catalog

Level Sensors

Product catalog summary
Overview: The document provides comprehensive information on level sensors by EGE-ELEKTRONIK SPEZIAL-SENSOREN GMBH, detailing specifications, applications, and installation guidelines. It covers sensors for both standard and explosion-hazardous environments.
Specifications: Various sensor series are described, including microwave meters (MFP, MFC, MFK), capacitive sensors (KGF, KGMR, KGFR, KFC), opto-switches (UFGS, UFS), conductive models (CFC), and hydrostatic level meters (DGC). Each series is tailored for specific applications with different materials, temperature ranges, and measurement capabilities.
Terminology: Definitions of key terms such as switching point, nominal switching point, effective operating distance, and hysteresis are provided to aid in understanding sensor performance and limits.
Installation and Operation: Guidelines emphasize correct positioning and material compatibility, with specific instructions to prevent build-up and ensure accurate measurements.
Level Sensors for Ex-applications: Information on sensors for explosion-hazardous areas is included, detailing necessary amplifiers and junction boxes for safe operation.
Accessories: Accessories such as mounting sleeves, connectors, and assembly parts are available to facilitate installation and integration into existing systems.
Key Features: The sensors offer high precision, are suitable for various liquids, and are designed to resist soiling and build-up. They are available in different lengths and can be adjusted for different media without additional equipment.
Specifications: The document details standards such as EN 60947-5-2 and EN 61508, and manufacturing standards like DIN ISO 228-1. Specific torque and sealing materials are required based on temperature and pressure conditions.
Procedures: Installation instructions highlight maintaining minimum separation distances to avoid interference, with specific guidelines for capacitive sensors.
Norms and Standards: Compliance with safety and performance standards is mandatory, especially for sensors in personal security applications.
Recommendations: Special sealings are advised for high-temperature or high-pressure applications, with testing recommended under application conditions.
Sensor Models and Features: Detailed specifications for sensor models like Series MFP, MFC, and KGF are provided, including supply voltage, current consumption, precision, temperature range, and protection standards.
Key Data from Tables and Graphs: Tables and graphs provide detailed specifications, including dimensions, output types, supply voltage, and environmental conditions, illustrating relationships like temperature and compressive strength.
Product Specifications: Details on clamps made of PTFE, hexagon socket screws, and screw-on-electrode sensor models are provided, with available lengths for use in plastic containers.
Contact Information: EGE-Elektronik Spezial-Sensoren GmbH's contact details and global presence in various countries are listed.
See more

Catalog excerpts

Level Sensors-2

Level Sensors Contents Technique and application for Level Sensors Sensors Terminology Installation and operation Level sensors Microwave meter Series MFP Microwave-compact Series MFC Microwave-compact Series Serie MFK Capacitive sensors-compact Series KGF / KGMR / KGFR / KFC Opto switch-compact Series UFGS / UFS Conductive compact model Series CFC Hydrostatic level meter Series DGC Capacitive analog-sensors up to 200 °C Series KFA Capacitive – 230 °C-low temperature Series KGFP Capacitive 230 °C-high temperature Series KGFT / KGFT-CER Capacitive amplifiers Series KK / KU / KUA Level Sensors...

 Open the catalog to page 2
Level Sensors-3

Level Sensors Technique & Application Sensors Microwave meter The MFP level meter for continuous monitoring of various liquids allow measurement of the fill level in plastic or metal tanks of any size. The devices offer a high measurement precision. They work with numerous liquids such as water, oil or emulsions. Principle of measurement: The microwaves are “guided” along the rod – and are reflected at the surface of the medium. From this the sensor determines the fill level. No adjustment is necessary for various media. The devices are made of aluminium and AISI 316 Ti stainless steel and are...

 Open the catalog to page 3
Level Sensors-4

Level Sensors Technique & Application Sensors/ Terminology Opto-Sensors UF... Optical sensors react to a change of the refraction index within the proximity of the sensor tip when being immersed into fluid. The sensor does not have to be adjusted. In rare cases, the container wall or particles within the fluid may reflect the light emitted by the sensor and thus interfere with the fluid detection. A trial run is recommended in such instances. The sensors are designed to be used with the respectively listed fluids under ntormal conditions. The chemical compatibility and technical suitability of...

 Open the catalog to page 4
Level Sensors-5

Level Sensors Technique & Application Terminology Assured operating distance sa Switching current Current consumption The assured operating point takes into account all the external influences, sample and media variances and is in the range from 0% to 72% of the rated operating distance point. Within this range a guaranteed switching is ensured. This current gives the maximum longterm current for the switching output of the sensor at an ambient temperature of 25 ºC and ohmic load. At an elevated ambient temperature, the current load capability decreases. For analog outputs, the boundary values...

 Open the catalog to page 5
Level Sensors-6

Level Sensors Technique & Application Installation and operation Collocation Instructions for mounting The sensor tip of short level sensors installed from the side must be located inside the container. To prevent buildup, it is recommended to install these sensors at a tilted angle of approx. 20°. With rod-style sensors, make sure that the tip is not affected by lateral forces. Such forces may occur, for example, when using sensors near filling openings or mixers. Only use materials for housing and sealing that are suitable for the respective application. When collocating the sensors, a minimum...

 Open the catalog to page 6
Level Sensors-7

Level Sensors Probes Compact models Amplifiers EGE-ELEKTRONIK SPEZIAL-SENSOREN GMBH TEL. +49 (0)4346 / 41580 . ege-elektronik.com

 Open the catalog to page 7
Level Sensors-8

LEVEL SENSORS Microwave meter Analog output or 2x PNP output High precision Water-based liquids Guided Microwave Design Output Single probe 4...20 mA, linear Single probe 2x PNP, programmable NO NC ID-No. Type-sensor length L Supply voltage Current consumption Current output Load resistance RL Switching current Reverse protection Precision Transition zone* [mm] [mm] Amvient temperature [°C] Medium temperature [°C] Sensitivity [εr] Protection [EN 60529] Housing material Material Sealing material Compressive strength [bar] Connection * Depending on the installation conditions and the medium, deviations...

 Open the catalog to page 8
Level Sensors-9

LEVEL SENSORS Microwave meter Analog output or 2x PNP output High precision Liquids from oil to water Guided Microwave Design Output Parallel probe 4...20 mA, linear Parallel probe 2x PNP, programmable NO NC ID-No. Type-sensor length L Supply voltage Current consumption Current output Load resistance RL Switching current Reverse protection Precision Transition zone* [mm] [mm] Amvient temperature [°C] Medium temperature [°C] Sensitivity [εr] Protection [EN 60529] Housing material Material Sealing material Compressive strength [bar] Connection * Depending on the installation conditions and the...

 Open the catalog to page 9
Level Sensors-10

LEVEL SENSORS Microwave meter Analog output or 2x PNP output High precision Easy cleaning Liquids from oil to water Guided Microwave Design Output Coaxial probe 4...20 mA, linear Coaxial probe 2x PNP, programmable NO NC ID-No. Type-sensorlength L Supply voltage Current consumption Current output Load resistance RL Switching current Reverse protection Precision Transition zone* [V] [mA] [mA] [Ω] [mA] [mm] [mm] [mm] Ambient temperature [°C] Medium temperature [°C] Sensitivity [εr] Protection [EN 60529] Housing material Material Sealing material Compressive strength [bar] Connection * Depending...

 Open the catalog to page 10
Level Sensors-11

LEVEL SENSORS Microwave meter Analog output or 2x PNP output High precision Probe surface coated for aggressiv media Guided Microwave Design Output Single probe 4...20 mA, linear Single probe 2x PNP, programmable NO NC ID-No. Type-sensorlength L Supply voltage [V] Current consumption [mA] Current output [mA] Load resistance RL [Ω] Switching current [mA] Reverse protection [mm] Precision [mm] Transition zone* [mm] Ambient temperature [°C] Medium temperature [°C] Sensitivity [εr] Protection [EN 60529] Housing material Material Sealing material Compressive strength [bar] Connection * Depending on...

 Open the catalog to page 11
Level Sensors-12

LEVEL SENSORS Microwave meter Analog output or 2x PNP output High precision Wetted parts are non-metalic Guided Microwave Design Output Single probe 4...20 mA, linear Single probe 2x PNP, programmable NO NC ID-No. Type-sensorlength L Supply voltage [V] Current consumption [mA] Current output [mA] Load resistance RL [Ω] Switching current [mA] Reverse protection [mm] Precision [mm] Transition zone* [mm] Ambient temperature [°C] Medium temperature [°C] Sensitivity [εr] Protection [EN 60529] Housing material Material Sealing material Compressive strength [bar] Connection * Depending on the installation...

 Open the catalog to page 12

All EGE-Elektronik Spezial-Sensoren GmbH catalogs and technical brochures

  1. Flow Sensors

    120  Pages

  2. SDNC 500

    2  Pages

  3. LDS 1000

    2  Pages

  4. LDV 1000

    2  Pages

  5. AGVU

    1  Page

  6. SDN 550

    1  Page

  7. SCS 440

    1  Page

  8. KBM

    1  Page

  9. Serie cfc

    1  Page

  10. MFP

    1  Page

  11. TGBA

    1  Page

  12. Serie AGVU

    1  Page

  13. Serie HGVH

    1  Page

  14. GK

    104  Pages

  15. Serie IGEXHa

    1  Page

  16. SDNC500

    2  Pages

  17. SNS 552

    2  Pages

  18. LDN 1000

    2  Pages

  19. SDN 500

    2  Pages

  20. Series MFP

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.