Design and Dimensions:
The document outlines the design specifications for the KBM series of inductive sensors, specifically models KBM 012, KBM 018, and KBM 030. Each model is available in two types based on housing material: ST52 and AISI 303. The sensors are designed for M12, M18, and M30 configurations with dimensions specified as L1 x L2 x L3 in millimeters.

Specifications:

• ID Numbers: Z01209 to Z01214
• Dimensions: Vary by model, e.g., KBM 012 has dimensions 34 x 24 x 40 mm.
• Hole Spacing: Ranges from 20 mm to 40 mm depending on the model.
• Installation: Sensors are installed flushed relative to the set-back surface.
• Housing Material: Options include hardened ST52 and AISI 303.

Features:

• Impact and shock-resistant design.
• Protected installation with simple adjustment via slotted holes.
• Quick and precise sensor mounting and replacement.

Mounting Instructions:
Mounting clamps are used for metal face sensors and are fastened to metal surfaces using M6 hexagon socket screws. Stainless steel washers must be placed in-between, and the typical torque applied is 6 Nm.