Brochure Pressure-level

Brochure Pressure-level

Brochure Pressure-level

Product catalog summary
Overview: The document provides detailed information about EGE-Elektronik's pressure sensors designed for automation applications. These sensors are ISO 9001 certified and are used for monitoring pressure levels in pipes and containers, with additional capabilities for fill level monitoring.
Specifications: The sensors feature a compact design, programmable settings, analog output, and two switching points. They are capable of measuring pressure with high accuracy, unaffected by foam or suspended matter, and are suitable for use with 24 V DC power supply. The sensors offer a 4 to 20 mA current output and are available in models with either two switching points or one analog output.
Functionality: The sensors are designed to be installed in the wall of a pressure container or pipe, with the medium contacting the ceramic gauge head directly. The sensors can withstand overloads up to 64 bar without damage, and the integrated electronics convert pressure changes into a proportional DC signal. The sensors feature a four-digit LED display for easy calibration and programming.
Installation and Programming: The sensors require installation with shielded wires, and the membrane gasket must be compatible with the medium used. Programming is facilitated through a keypad, with settings stored in an EEPROM for security. The sensors come with pre-programmed default settings, which can be adjusted using an access code.
Materials and Resistance: The sensor membrane is made of fluoroelastomer (FPM), with resistance characteristics suitable for various media, including water, hydrocarbons, acids, and oils. The housing is made of PBT, and the sensors are protected to IP 65 standards.
Technical Data: The document provides detailed technical specifications, including sensing range, supply voltage, current output, ambient and medium temperature ranges, compressive strength, and material details. The sensors are equipped with M12 connectors and are compatible with specific connecting cables.
Additional Products: The document briefly mentions other sensor types offered by EGE-Elektronik, including infrared detectors, ultrasonic sensors, level sensors, flow sensors, and temperature sensors, each with specific applications and features.
Contact Information: The document lists contact details for EGE-Elektronik's headquarters and various international distributors, providing phone and fax numbers for customer support and inquiries.
See more

Catalog excerpts

Brochure Pressure-level-1

evel ure-L Compact model Programmable Analog output Two switching points Level measuring

 Open the catalog to page 1
Brochure Pressure-level-2

Technology and application Usage This high performance device monitors pressure levels in pipes and containers. However, the high accuracy of its capacitive ceramic gauge head makes it an effective fill level monitor as well. It can record fill levels with an accuracy of one centimeter in containers that stand five meters tall. Measurement instruments with a 1000 mbar measurement range have proven to be very useful for these types of applications. When measuring the fill level of water, 10 mbar of pressure corresponds to 10 cm water height. The instrument displays the pressure value digitally....

 Open the catalog to page 2
Brochure Pressure-level-3

Pressure Sensors Two switching points Series DN 752 Monitoring sensor for gases and fluids Fast and easy programming Two independent switching points 7-segment display Display rotatable Design Sensing range Output ID-No. Type Supply voltage [V] Switching current [mA] Current consumption [mA] Ambient temperature [°C] Medium temperature [°C] Compressive strength [bar] Sensor material Material gauge head Sealing material Housing material Protection [EN 60529] Connection 2 3 48 AISI 316 Ti Ceramic FPM PBT IP 65 M12 connector (1) BN (4) BK Connecting cable Type SLG 4-2 (Z00445) EGE-Elektronik Spezial-Sensoren...

 Open the catalog to page 3
Brochure Pressure-level-4

Pressure Sensors Analog output Series DN 752 Monitoring sensor for gases and fluids Fast and easy programming Analog output model 7-segment display Display rotatable Design Sensing range Output ID-No. Type Supply voltage [V] Current ouput [mA] Load RL [Ω] Current consumption [mA] Ambient temperature [°C] Medium temperature [°C] Compressive strength [bar] Sensor material Material gauge head Sealing material Housing material Protection [EN 60529] Connection 48 AISI 316 Ti Ceramic FPM PBT IP 65 M12 connector L+ Connecting cable Type SLG 3-2 (Z01076) EGE-Elektronik Spezial-Sensoren GmbH • http://www.ege-elekt...

 Open the catalog to page 4
Brochure Pressure-level-5

Pressure SensorsTwo switching points and analog output Series DN 752 Monitoring sensor for gases and fluids Linear current output 4...20 mA Two programmable switching points NC/NO programmable Display rotatable DC • G3/4Dimensions Sensing range [bar] Connection cable Type SLG 4-2 (Z00445) EGE-Elektronik Spezial-Sensoren GmbH • http://www.ege-elektronik.com

 Open the catalog to page 5
Brochure Pressure-level-6

Pressure SensorsSwitching points and analog outputAdditional technical data DN 752 GAPP... Output analog 4...20 mA Linearity < 0.2% of maximum value Temperature drift < 0.1% / 10 K of maximum value Long time drift < 0.1% / Year of maximum value Influence of supply voltage < 0.5% / 10 V of maximum value Alignment range zero point 0% - 95% / final point 3,3% - 100% Adjustment range of damping 0...30 seconds Switching output S1 / S2 PNP NO/NC programmable Output voltage +UB - 1.5 V Time delay < 8 ms Rise time < 400 ps with Rl < 400 Q or Il > 4.5...

 Open the catalog to page 6
Brochure Pressure-level-7

Flow sensors ■ Electronical monitoring of flow ■ Lubrication monitoring ■ Measuring range 0.1 ml/min...100 l/min ■ Detection range 1...300 cm/s ■ Reaction time 0.5 s Level sensors for Ex-applications ■ For level monitoring in Ex areas ■ For temperatures - 35...+200 °C ■ With PTFE connector cable ■ Sensors for connection to amplifiers Level sensors ■ For level monitoring - 230...+230 °C ■ Steam proof at a pressure of up to 30 bar ■ For hot motor oil ■ For liquid nitrogen ■ For chemically aggressive media Ultrasonic sensors ■ Switching distance up to 5000 mm ■ Level monitoring ■ Watertight housing ■...

 Open the catalog to page 7
Brochure Pressure-level-8

Cematic-Electric B.V. Postbus 777 NL-7550 AT Hengelo Tel. +31 742433422 Fax +31 742913333 ICM Ital Control Meters Srl Via della Valle 67 I-20048 Carate Brianza (Mi) Tel. +39 0362 8052 00 Fax +39 0362 8052 01 Bibus Spain, S. L. Rua do Arroncal, Vial C - Nave 4A ES-36350 Nigran Tel. +34 986 247286 Fax +34 986 209247 Powelectrics Limited Sandy Hill Park, Sandy Way Amington, Tamworth GB-Staffordshire B77 4DU Tel. +44 1827310666 Fax +44 1827310999 Countapulse Controls (PTY) LTD. P.O.B. 40393 ZA-2022 Cleveland Tel. +27 116157556 Fax +27 116157513 Shanghai Beishidetian Business Trade Co., Ltd. 4F, No....

 Open the catalog to page 8

All EGE-Elektronik Spezial-Sensoren GmbH catalogs and technical brochures

  1. Flow Sensors

    120  Pages

  2. SDNC 500

    2  Pages

  3. LDS 1000

    2  Pages

  4. LDV 1000

    2  Pages

  5. AGVU

    1  Page

  6. SDN 550

    1  Page

  7. SCS 440

    1  Page

  8. KBM

    1  Page

  9. Serie cfc

    1  Page

  10. MFP

    1  Page

  11. TGBA

    1  Page

  12. Serie AGVU

    1  Page

  13. Serie HGVH

    1  Page

  14. GK

    104  Pages

  15. Serie IGEXHa

    1  Page

  16. SDNC500

    2  Pages

  17. SNS 552

    2  Pages

  18. LDN 1000

    2  Pages

  19. SDN 500

    2  Pages

  20. Series MFP

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.