Type Operation Model Connections Ends Ratings Sizes PARTS Pressure Reducing Valve - Model PRV45 Self-operated pressure reducing valve with diaphragm Valve tends to close when outlet pressure increases PRV45 Flanged (DIN - ANSI) or Threaded (BSP - NPT) RF - RF, NPT, BSP PN16 (150#) Kv Cv Temperature Inlet max. pressure Outlet pressure Suitable for 16 [barg] 0,01 - 8 [barg] Steam, compressed air, water and neutral gases GALILEO 8, POL. IND. CAN ESTELLA 08635 ST ESTEVE SESROVIRES, BARCELONA, SPAIN www.efSVaIVeS.c°m REV. 01/ 14 This information is subjected to changes

Model PRV45 - Pressure Reducing Valve Recommended spare parts REV. 01 / 14 This information is subjected to changes GALILEO 8, POL. IND. CAN ESTELLA 08635 ST ESTEVE SESROVIRES, BARCELONA, SPAIN www.efsvalves.c°ITI

Model PRV45 - Pressure Reducing Valve IMPORTANT NOTE: Kv or CV reduced is available In red color, sizes out of standards REV. 01 / 14 This information is subjected to changes GALILEO 8, POL. IND. CAN ESTELLA 08635 ST ESTEVE SESROVIRES, BARCELONA, SPAIN www.efsvalves.c°ITI

Model PRV45 - Pressure Reducing Valve OPERATION PRV45 valve should be installed in horizontal pipe and respecting the fluid flow direction must match the arrow on the valve body. Steam installations, the actuator must be installed in low position. Condensate tank is essential when temperatures above 120°C to protect the diaphragm from overheating. The tank is always placed in the highest point of the pipe. The strainer (item 2) must be installed upstream of the regulator to protect seal and diaphragm and avoid excessive maintenance. Remember to leave enough space to remove and clean it. TYPICAL...

Model PRV45 – Pressure Reducing Valve TYPICAL INSTALLATION FOR STEAM (WITH CONDENSATING POT) 1. Check Valve 1a. Check Valve 1b. Check Valve 2. Filter 3. Inlet pressure gauge 4. 5. 6. Pressure reducing valve PRV Safety valve Outlet pressure gauge ATEX approved Disclaimer The information, specifications and technical data contained in this catalogue are subject to change without notice by the manufacturer. The user should verify all technical data and specifications prior to use. EFSVALVES does not warrant that the material and information contained herein is current or correct and assumes no responsibility...