Up to 3 meters High intensity lighting Ajustable beam angle Built-in driver Multimode Flexible LED bar light DATASHEET EFFI-FLEX2-V1.2.2024

Standard vERSiON Optical Length [mm] 60100200300 Every 100mm WindowTR (Transparent) (*) The UV 365mm wavelength is a specific configuration. Refer to the corresponding annex. AVAiLABLE VERSiONS & OPTiONS OTHER LED DENSITIES VERSIONS L2: Economical version X2: High uniformity version 1 LED every 40mm vs 1 LED every 20mm for standard (See corresponding annex) EFFI-FLEX2-X2-XXXX-ZZZ-WW-PP 1 LED every 10mm vs 1 LED every 20mm for standard (See corresponding annex) Linescan film Cylindrical lens The light will be delivered as a package including TR, SD and OP windows, and assembled in the default...

Illumination Mode Power Supply Optical (See wiring layout page 6) In continuous Power mode Consumption (See details page 6) In Autostrobe mode (peak) Autostrobe Response time 24V DC (+/-10%) M12 (A-coded) - 5 pins M12 Power (T-coded) - 4 pins 2x M12 Power (T-coded) - 4 pins Max. 10W per 100 mm of optical length Max. 40W per 100mm of optical length Multimode (3 modes: AutoStrobe with overdrive intensity / Dimmable strobe / Dimmable continuous) The output optical power is adjustable from 20% to 100% by applying a signal from [2V-10VDC] Total voltage range [2V-24VDC] / Don't exceed 24V DC / Max....

OPTICAL SPECIFICATIONS Many possible configurations in just one light Diffusers Lens position The EFFI-Flex2 offers flexible lens positioning to control the beam angle. The user can adjust it by himself: the angle can be widened by moving the lens closer to the LEDs or narrowed by moving the lens further away from the LEDs. Depending on the uniformity needed for the application, the user can easily change the diffuser to satisfy the application requirements. How to change the optical configuration of your EFFI-Flex2? The EFFI-Flex2 offers flexible lens positioning to control the beam angle and...

Lens position impact (continued) Illuminance vs Working distance (WD) - White LED Illuminance during Overdrive (kLux) Illuminance in continuous mode (kLux) Illuminance during Overdrive (kLux) Illuminance in continuous mode (kLux) Note: The measurements have been made with a 800mm white light, transparent window: EFFI-FLEX2-800-000-TR-PP. For the L2 version divide the illuminance by 2 (refer to the corresponding annex). Polarizer Using polarizers, on the Effilux light and on the camera, it is possible to eliminate glare from your workpiece making it easier to acquire a suitable image for the application....

The EFFI-Flex2 has been designed to have several electronical modes available in the same product. Additionnally to that, our engineers have developed a strong AutoStrobe mode to boost the injected current up to 450% of the continuous mode current value. Thus, EFFI-Flex2 can be used to have a: • High power strobe (Autostrobe mode): 450% current value with a max duty cycle of 30% and max pulse duration of 245ms. • Dimmable light (Strobe or Continuous mode): Light intensity between 20% and 100% monitored with the AIC pin and strobe or continuous mode monitored with the trigger pin. Analog Intensity...

Wiring layout Depending on the size, the light comes with different connectors (refer to the table above). M12 Power (T-coded) - 4 pins male connector The EFFI-FLEX2 requires 24V DC input power. AIC pin can stay unplugged for Autostrobe mode, or tied to +24V for continuous mode at maximum intensity. PNP trigger pin (or NPN) needs to be connected either to a trigger signal for AutoStrobe and Strobe mode or to a continuous signal for Continuous mode. (*) For light requiring M12P connector, the NPN trigger is optionnal. With the NPN option, the PNP trigger input is replaced by the NPN trigger input....

MECHANICAL SPECIFICATIONS

T-Nut system

ACCESSORIES Please refer to the specific documentation for additional information on the accessories of the EFFI-Flex2 Extension cables T-Nut Kit: EFFV-BOLT-0011 Pivot joint Kit: EFFM-1-0002 Camera Filters EFFO-FLR-... CUSTOMIZATION Please ask your sales contact for a custom device. Custom software Other caps color CONTACT INFORMATION Please refer to the specific documentation (datasheet, user manual and drawing) for complementary information. Contents of this document are based on information available as of May-2024 and may be changed without prior notice. EFFILUX 1, Rue de Terre Neuve Mini...

gffiFLEX2 UV365Multimode Flexible UV LED bar lightPart-numbering EFFI-FLEX2 - XXXX - ZZZ - WW - PP • The EFFI-Flex2 UV365 comes with one possible configuration: transparent window and lens position at P0 (90°) (i.e. no lenses) • The transparent window for EFFI-Flex2 UV365 is a special made transparent window for UV365. The standard transparent window of EFFI-Flex2 is not compatible with EFFI-Flex2 UV365. • Linescan film and standard polarizer are not compatible with UV365. • For maximum performances, please use a cable no longer than 5m. Otherwise, the overdrive performances may be impacted.

Electronical modes AutoStrobe o ©Dimmable Strobe Output Intensity Output Intensity Intensity controlled by AIC signal - Dimmable Continuous Output Intensity Intensity controlled Note: Compared to the standard version the autostrobe overdrive mode has been capped at 285% of the continuous level. Used with the EFFI-Flex2 UV 365, the Pure UV technology is an innovative system that drastically improves the fluorescence effect while concurrently removing glare and improving contrast. Note: The Pure UV light must be used along with a UV Cut filter on the camera. Cylindrical lens The additional Cylindrical...

The standard LED density for the EFFI-Flex2 is one LED every 20mm. For specific needs, we can also offer two other LED densities: • L2 - Economical version: Twice fewer LEDs (every 40mm) - Twice less light power • X2 - High light uniformity: Twice more LEDs (every 10mm). - Same light power Those modifications change the power consumptions and the light uniformity. For these references refer to the datas below. Note: These values are maximum values. The consumption may vary according to the wavelength and the software.