215
20Pages

ICON 215 An excellent product along with extraordinary quality are not enough for us. We strive to increase your value because we want you to realize your full potential and go beyond. We share the same goals and the choice to aim for the top, and we are committed to offering the best performance in every detail. Beautiful & Smart ICON 215 also means aesthetics and attention to detail: this is reflected in its slender and sporty lines. Even the new housings in high-tech materials stand out with their sophisticated design that enhances the crane’s look. Plus, ICON 215 has exceptional...

Technical possibilities Total control On ICON 215 you can also manage other electronic truck-related features by remote control (e.g. switching on and switching off the engine). PROGRESS 2.0 also allows you to integrate other operating functions: front stabilizers, truck-body sides, towing winch, grab, bucket, etc. Air geometries PROGRESS 2.0 allows you to check and keep under control the geometrical arrangement of the crane booms both on the remote control display and the panel on ICON 215 base. Working areas PROGRESS 2.0 manages 4 different crane working areas: front, back, left and...

Lifting the maximum weight Load capacity of ICON 215, calculated by Progress 2.0, is always maximized. In fact the extension of its stabilisers is perfectly measured thanks to Encoder or magnetic sensors. No oversight PROGRESS 2.0 stores the crane operating cycles and faults detected, and indicates scheduled maintenance operations. Remote help When needed, remote assistance can be activated by the dealer or by Effer headquarters. Technical possibilities

Technical possibilities Smart Heat Exchanger PROGRESS 2.0 system manages oil temperature. The heat exchanger is constantly working to reduce energy consumption and oil overheating, so extending life span of all components. Max Speed Limitation (MSL) Thanks to PROGRESS 2.0 system it is possible to manage crane hook speed, during simultaneous movements of the booms. In this way, load swings are reduced and shocks to the crane structure are avoided. Assisted Winch Control Recovery rope during boom section extension/retraction. With this feature, the winch rope moves along together with...

“Virtual shield” cabin-collision avoidance PROGRESS 2.0 allows you to set a protected workspace around the cabin. In the proximity of this area, ICON 215 movements are automatically stopped to protect the cabin, thus eliminating the risk of accidental impact. You can also set a prohibited working area to protect the manned workstation. Unload immediately without wasting time It is possible to handle ICON 215 without stabilizing it, to quickly download from dumper. Recovery System In case of anomalies, PROGRESS 2.0 allows the operator to park the crane in emergency mode. This way you can...

Stronger, furtherEffer second boom and extensions In the design stage of a truck-mounted crane, the crucial element in providing exceptional solutions is the second boom and its junction with its relative extensions. Infact these components help to define crane performance in terms of boom length, working speed, lifting capacity and stress resistance. Effer designers, thanks to their experience have come up with the following exceptional production and technical solutions: • Boom section • Lateral coupling • Extension jacks: fastening by means of spring and advanced attachment Symmetrical...

Unbeatable speed Boom and extensions are manufactured using a single sheet of metal folded in various points with one internal and external robotic welding. Since the booms and extensions are made with a single welding the boom is made more resistant to strain over time. Effer’s experience has created HSS – High Speed System, included in all but some lighter models. The system, which uses a regeneration valve, makes the extensions open more quickly as it recovers the oil which would otherwise go into the tank. The right capacity Large pipe diameter reduces pressure and temperature of...

Light and powerful The structure of Effer cranes Effer cranes structure guarantees significant performance but at the same time you have a very light crane thanks to the design solutions engineered by Effer’s R&D department. The light weight of Effer cranes allows for a greater residual load on the truck: greater useful load = less time = higher profit. A step further Effer uses high strength Weldox steel for crane structure. This choice improves structure resistance while maintaining the same plates thickness and allowing the most advanced construction solutions. The right thickness where...

Wind&Drive system and Effer winch A smart possibility for ICON Today 70% of medium-large cranes are used with a winch. With Effer solution Wind&Drive, the winch cable pulleys are integrated into the crane structure. All operations needed to use the winch are thus eliminated: switching from “crane with hook” to “crane with winch” is immediate, quicker and easier, with better results in less time. Total integration The integration of the Wind & Drive and winch in the crane booms allows you to be immediately operational without the need to mount components at the beginning of the operating...

Advantages Maximum productivity on 360° ICON 215 allows the operator to work at the best performances on 360° thanks to the slewing ring continuous rotation. ICON 215 is the first crane in its category with this rotation system: a feature that makes this machine really revolutionary for the market. Plus, ICON 215 slewing ring is protected by a carter in hi-tech material, which is very resistant against shocks and dirt. LONG LASTING

Compact size thanks to slewing ring with external motor gear New system for hose support guide The truck body cut’s thickness is very reduced: this allows you to mount a bigger chassis on the truck, thus gaining more payload. It is very compact so it has a smaller size, and the structure is held up in 2 points: this avoids vibrations during operations. EASY WORK EASY EASY