OPL is a compact two finger parallel gripper featuring high process reliability and long service life, suitable for handling low weight components. Advantages • Compact housing made of hard coated aluminum alloy. • Sturdy C-slot guidance with hardened steel gibs for effective jaw guidance, precise handling, and easy maintenance. • Wedge-hook design for high power transmission and synchronized gripping. • Mounting from two sides in two screw directions for universal and flexible gripper assembly. • Air supply via fitting screw connections. Model Stroke Per Jaw Air Consumption Per Cycle (Dual Stroke) Closing Force Opening Per Jaw @ 6 Force Per Jaw bar @ 6 bar Recommended Workpiece Weight* Weight Repeatability Opening Working Noise Emission Pressure Temperature (Sound Pressure) * Recommended workpiece weight is calculated for force-fit gripping with a static Coefficient of Friction of 0.15 and a Safety Factor of 3 against workpiece slippage. Guidelines for the selection of a gripper model Selection of the correct gripper model depends on the workpiece's weight, the friction coefficient between the fingers and the workpiece and the required motion of the application. Due to inertial forces associated with motion, the gripper model should feature a holding force from 10 to 20 times the workpiece's weight. If the application presents high acceleration/deceleration or impact during the motion, then a further safety margin should be considered. EFFECTO GROUP S.p.A. Via Roma, 141/143 - 28017 San Maurizio d'Opaglio (NO) Tel. +39 0322 96142 Fax +39 0322 967453 www.effectogroup.com

PRODUCT INFORMATION Options • Mounting brackets for inductive proximity switches * Dimensions are in millimiters (inches). ** All dimensions are descriptive and subject to variation for technical upgrading. We reserve the right to make variations without prior notification EFFECTO GROUP S.p.A. Via Roma, 141/143 - 28017 San Maurizio d'Opaglio (NO) - Italy Tel. +39 0322 96142 Fax +39 0322 967453 www.effectogroup.com