OLE
1 / 2Pages

Catalog excerpts

OLE is an angular gripper for universal use in clean and slightly dirty environments. Suitable for applications requiring space-saving gripper assemblies. Advantages • Slim design allowing the grippers to be arranged in a row • Available with range of piston plate diameters from 12 to 16mm (see OF for bigger sizes). • Light, compact design for space-saving handling without interfering contours • Integrated permanent magnets for direct monitoring of piston movement. • Slots for mounting and positioning of magnetic field sensors. SPECIFICATIONS Model Air Stroke Consumption Per Jaw Per Cycle (Dual Stroke) Closing Opening Force Force Per Per Jaw @ 6 Jaw @ 6 bar bar Recommended Workpiece Weight Weight* Opening Pressure Working Temperature Noise Emission (Sound Pressure) Recommended workpiece weight is calculated for force-fit gripping with a static Coefficient of Friction of 0.15 and a Safety Factor of 3 against workpiece slippage. ** Further dimensions in OF 2-finger pages SECTIONAL DIAGRAM Guidelines for the selection of a gripper model Selection of the correct gripper model depends on the workpiece's weight, the friction coefficient between the fingers and the workpiece and the required motion of the application. Due to inertial forces associated with motion, the gripper model should feature a holding force from 10 to 20 times the workpiece's weight. If the application presents high acceleration/deceleration or impact during the motion, then a further safety margin should be considered.

Open the catalog to page 1

PRODUCT INFORMATION D1 D5 (CLOSE AIR SUPPLY) Options • Magnetic switches miMimiters (inches). e descriptive and subject to variation for technical upgrading. We reserve the right to make variations without prior notification EFFECTO GROUP S.p.A. Via Roma, 141/143 - 28017 San Maurizio d'Opaglio (NO) - Italy Tel. +39 0322 96142 Fax +39 0322 967453 www.effectogroup.com

Open the catalog to page 2