Pneumatic Toggle GrippersOG 2-Finger OG2 is a two finger toggle gripper with high gripping force, suitable for heavy industrial applications. Advantages • High energy density. • Capability to grip parts in opening and closing mode. • Driving mechanism guided along the entire stroke. • Large surface for finger mounting to guarantee extremely safe clamping of the workpiece. • Non-reversible gripping in opening and closing position even without driving air thanks to the toggle mechanism. • Air supply via screw connection. SPECIFICATIONSModel Stroke Per Jaw Air Consumption Per Cycle (Dual Stroke) Recommended Workpiece Weight* Weight Repeatability Opening Pressure Working Temperature Noise Emission (Sound Pressure) Finger mounting options SECTIONAL DIAGRAM Guidelines for the selection of a gripper model Selection of the correct gripper model depends on the workpiece's weight, the friction coefficient between the fingers and the workpiece and the required motion of the application. Due to inertial forces associated with motion, the gripper model should feature a holding force from 10 to 20 times the workpiece's weight. If the application presents high acceleration/deceleration or impact during the motion, then a further safety margin should be considered.

Options • Mounting brackets for inductive proximity switches • Magnetic switches * Dimensions are in millimiters (inches). ** All dimensions are descriptive and subject to variation for technical upgrading. We reserve the right to make variations without prior notification EFFECTO GROUP S.p.A. Via Roma, 141/143 - 28017 San Maurizio d'Opaglio (NO) - Italy Tel. +39 0322 96142 Fax +39 0322 967453 www.effectogroup.com