DTS is a universal two finger parallel gripper featuring process reliability, suitable for a wide range of industrial applications. Advantages • Robust and lightweight housing made of hard-coated aluminum alloy. • Sturdy T-slot guidance for effective jaw guidance, precise handling, and easy maintenance. • Wedge-hook design for high power transmission and synchronized gripping. • Compact dimensions for minimal impact in customers' applications. • Mounting from two sides in three screw directions for universal and flexible gripper assembly. • Integrated permanent magnets for direct monitoring of jaw movement. • Slots for mounting and positioning of magnetic field sensors. • Air supply via hose-free direct connections or fitting screw connections. Recommended workpiece weight is calculated for force-fit gripping with a static Coefficient of Friction of 0.15 and a Safety Factor of 3 against workpiece slippage. Guidelines for the selection of a gripper model Selection of the correct gripper model depends on the workpiece's weight, the friction coefficient between the fingers and the workpiece and the required motion of the application. Due to inertial forces associated with motion, the gripper model should feature a holding force from 10 to 20 times the workpiece's weight. If the application presents high acceleration/deceleration or impact during the motion, then a furthe

PRODUCT INFORMATION Options • High force version (S version) • Spring integrated into cylinder as energy storage to maintain a minimum gripping force also in the case of pressure drop (version with the effect of a closing force or version with opening force) Mounting brackets for inductive proximity switches • Magnetic switches * Dimensions are in millimiters (inches). ** All dimensions are descriptive and subject to variation for technical upgrading. We reserve the right to make variations without prior notification EFFECTO GROUP S.p.A. Via Roma, 141/143 - 28017 San Maurizio d'Opaglio (NO) -...