Advanced Components for Automation tecnomors BLQ-I BLQ-I is a rubber gripper featuring an inflatable rubber bladder construction that allows a single model to manipulate a great number of shapes. Advantages • The BLQ-I can increase its diameter by as much as 1.86 times its deflated shape allowing for one gripper to handle multiple part sizes. • Delicate handling by controlling the amount of pressure within the bladder. • Soft and secure touch even with heavy loads thanks to the distribution of the holding force over a large surface area. • Non-marring contact due to the soft touch of rubber and air, especially suitable for glass and plastic objects. • Wide size range, handling objects with inner diameter from 8.5 to 105mm. • No lubrication required. • Long life even in dusty environments due to lack of seals or bearings. Applicable Work Diameter Recommended Load Weight Working Temperature Load Capability** Rubber Section Material Metallic Section Material * End-effector must be inflated unrestricted at the maximun recommended working pressure for 30 cycles. **Load capability evaluated with working diameter range at max allowed pressure.

* Dimensions are in millimiters (inches). ** All dimensions are descriptive and subject to variation for technical upgrading. We reserve the right to make variations without prior notification Applied Robotics 648 Saratoga Road Glenville, NY 12302 USA Tel. +1 518 384 1000 Fax +1.5183841200 [email protected] www.appliedrobotics.com EFFECTO GROUP S.p.A. Via Roma, 141/143 28017 San Maurizio d'Opaglio (NO) - Italy Tel. +39 0322 96142 Fax +39 0322 967453 [email protected] www.effectogroup.com