Catalogs >
EFD >
Series 550LP-560HP

Series 550LP-560HP
4Pages

Catalog excerpts

Series 550 LP and 560 HPManual Dispense Valve The inexpensive Series 550 LP (shown at right) and 560 HP Valves are intended for low pressure and high pressure meter mix applications, respectively. These manual valves are ideal for dispensing beads or RTM casting. The design is simple: two ball valves are threaded into the back of the manifold and are connected to a common lever so that both valves open and close at the same time. (The 550 LP Valve is not intended for “feathering” or otherwise attempting to meter the flow.) Specifications ■ Material Inlet: 1/4” FNPT ■ Weight: 550 Valve: 2.5 lbs (1.1 kg) 560 Valve: 1,500 psi (103 bar) ■ Pressure Rating: 550 Valve: 600 psi (41 bar) 560 Valve: 1,500 psi (103 bar) 550 Valve: Brass, Aluminum, and Carbon Steel 560 Valve: 303 SS Options ■ Low Flow ■ High Flow ■ Wide Ratio Wide Ratio High Flow Low Flow Wide Ratio High Flow Low Flow Brass / Alum. / CS Brass / Alum. / CS Brass / Alum. / CS Stainless Steel Stainless Steel Stainless Steel Brass Stainless Steel Valve w/Series 160 Outlet Valve w/Series 160 Outlet Valve w/Series 160 Outlet Valve w/Series 160 Outlet Valve w/Series 160 Outlet Valve w/Series 160 Outlet Solvent Flush Check Valve Solvent Flush Check Valve ■ Series 160 Mixers: Specifications Element: Polyplas™ Housing: Polypropylene Accessories Dispensing Tips Manifold Night Cap and Ratio Check Cap One-Piece Jacket Pipe Adapter Retaining Nut

Open the catalog to page 1

SERIES 550 LP Dispense Gun (Brass, Aluminum & Carbon Steel Wetted Parts) Maximum Working Pressure: 600 psi ( 40 bars) Manifold Selection/ Orifice style Ref. # Qty. Part # Description 1 1 7702522 (551-101) Hand Grip 5 2 7702529 (551-105) ON/Off Ball Valve (Brass) Accessory C: Ratio Check cap, Part # 7701184 (165-RC/01) Accessory D: Night Cap, Part # 7701181 (165-Cap/01)

Open the catalog to page 2

SERIES 560 LP Gun (Stainless Steel) (All Stainless Steel Wetted Parts) Maximum Working Pressure: 1500 psi (100 bars) Manifold Selection/ Orifice style (561 -105) ON/Off Ball Valve (SS) High Flow-HF: 3B & 3E Different ratio-DR: 3C Accessory A: Solvent Flush Check: Valve, Brass, Part # 7702492 (501-131), 7702494 (501-131SS) Accessory C: Ratio Check cap, Part # 7701184 (165-RC/01) Accessory D: Night Cap, Part # 7701181 (165-Cap/01)

Open the catalog to page 3

Series 550 LP and 560 HP Manual Dispense Valve For Nordson EFD sales and service in over 30 countries, contact Nordson EFD or go to www.nordsonefd.com East Providence, RI USA USA & Canada: 800.556.3484; +1.401.431.7000 info@nordsonefd.com Dunstable, Bedfordshire, UK 0800 585733; +44 (0) 1582 666334 Ireland 00800 8272 9444 europe@nordsonefd.com China: +86 (21) 3866 9006 china@nordsonefd.com Singapore: +65 6796 9522 sin-mal@nordsonefd.com The Wave Design is a trademark of Nordson Corporation. ©2010 Nordson Corporation v042710

Open the catalog to page 4