Catalogs >
EFD >
ProcessMate 6500 Temperature Control Unit

ProcessMate 6500 Temperature Control Unit
2Pages

Catalog excerpts

ProcessMate 6500 Temperature Control Unit - 1

ProcessMate 6500 Temperature Control Unit Prevent material degradation and eliminate deposit size variation Adhesives Epoxies Solder RTV/sealants Solder resists Paste fluxes EFD presents the new ProcessMate™ 6500 Temperature Control Unit. This simple-to-integrate process controller maintains precise temperature control of a dispensing process chamber within ± 0.1º C of the set point from 10º to 40º C. The ProcessMate TCU is suited for manual and automated applications using syringes with air dispensers, valves, and other deposition equipment. Protect your processes against material degradation and eliminate deposit size variation due to fluctuating viscosity. Features • Compact — Controls just the process, eliminating the need for machine enclosures and replaces large environmental control systems that waste critical floor space. Maintains temperature-sensitive dispensing processes within ±0.1° C of a desired set point, across a 10° to 40° C range. • Cost effective — Operating costs are only pennies per day compared to big, bulky machine enclosures and/or thermal facility controls. Localized temperatures within the ProcessMate TCU are reached within minutes instead of hours. • Precise process control — Deposition process chamber environment is maintained to within ±0.1° C. ProcessMate 6500 Temperature Control Unit • Easy to install, adjust and use — Easy to implement on automated, hand-held, benchtop and cartridge dispensing systems. A customized line of staticdissipative enclosures is available. Common Process Problems • Material Temperature Fluctuation • Viscosity Change • Inconsistent Deposit Size • Prematur

Open the catalog to page 1

ProcessMate 6500 Temperature Control Unit - 2

Specifications Item Cabinet Size Input Voltage Input Frequency Input Power Internal Voltage Temperature Control Ambient Operating Conditions Temperature -10° to 55° C (14° to 131°F) Humidity 85% RH at 30° C (86° F) non-condensing Height above sea level 2000 meters (6,562 feet) maximum Maximum/Minimum Temperature based on ambient conditions* Under normal operating temperatures, the ProcessMate TCU can maintain the dispense process chamber environment to ±0.1° C, from 10° to 40° C (50° to 104° F). Normal operating conditions are considered to be ambient air feed between 15° and 27° C (60° to...

Open the catalog to page 2