Catalogs >
EFD >
MicroSpray? Valves

MicroSpray? Valves
2Pages

Catalog excerpts

787MS-SS valve system produces spray patterns as small as 3.3 mm (0.130") activators coatings inks liquid fluxes oils silicones solvents A NORDSON COMPANY The 787MS-SS Series is a precision spray valve that uses low volume low pressure (LVLP) technology to produce uniform spray patterns between 3.3 mm and 19 mm (0.130 and 0.75") in diameter. Innovative design uses a small gauge 0.3 mm – 0.1 mm (0.013" – 0.004" ID) disposable dispensing tip in place of a standard spray nozzle. This concentrates the LVLP air used to atomize the coating into uniform spray patterns over 30% smaller than EFD’s standard spray valve configuration. Between shots the valve needle seats in the hub of the dispensing tip, virtually eliminating dead fluid volume. Features • High transfer efficiency • No overspray or mist • Medium- to low-viscosity fluids • Consistent spray patterns • Cycle rate exceeds 400/minute • Low maintenance design Performance Guarantee Electronic pdf files of EFD manuals are also available at www.efd-inc.com www.efd-inc.com info@efd-inc.com USA & Canada 800-556-3484 Europe +44 (0) 1582 666334 Asia +86 (21) 3866 9166 Sales and service of EFD® dispensing systems are available worldwide. ™

Open the catalog to page 1

Spray valve systems The complete system includes the 787MS-SS dispense valve, ValveMate 8040 controller, and the fluid reservoir. Expert technical assistance and high quality standards ensure productive, trouble-free performance. EFD offers a full line of reliable dispensing systems to meet your specific application requirements. ValveMate 8040 Controller 8040 The ValveMate controls valve open time and nozzle pressure. Its compact size allows the controller to be mounted near the valve for easy setup and spray adjustment. SPRAY VALVE CONTROLLER • Multi-valve control- up to (2) spray valves...

Open the catalog to page 2