Catalogs >
EFD >
MC800 Continuous Lubrication Systems

MC800 Continuous Lubrication Systems
4Pages

Catalog excerpts

MC800 Continuous Lubrication Systems - 1

A NORDSON COMPANY MicroCoat® MC800 Lubrication System Configure up to eight valves. Switch oils in minutes. Applications • High-speed stamping (lead frames, motor laminations, electrical terminals, connector pins) • Tube forming • Fine blanking • Corrosion/rust prevention • Can end pull tabs • Cooling fin forming • Fabric coating • Cable/wire coating “The savings have been staggering – now that we can keep all the oil on the stock instead of the floor, we’ve reduced oil use by about 90%.” Tony Daly, Project & Maintenance Manager Sharp Precision Manufacturing UK Ltd. “The MicroCoat has increased die life 50%, reduced maintenance and downtime, and given us greater production capacity. Plus, part consistency is dramatically better.” Dennis Herdegen, Vice President of Manufacturing ETCO Inc. • Foil rolling • Blank stock coating • Coil stock slitting MicroCoat Rethinking lubrication ®

Open the catalog to page 1

MC800 Continuous Lubrication Systems - 2

Assemble the pieces… Precision Lubrication by MicroCoat. ® Reduce oil use 90% Extend Tool Life 200%+ The MicroCoat system applies lubricant in a fine, even film. Just the amount you specify. No more, no less. With instant flow adjustment – no wait time for pads or rollers to become wet or dry out. This unique, fully integrated system uses Low Volume Low Pressure (LVLP) technology to provide steady, consistent lubrication without the overspray or mist of airless spray systems. Features Increase Press Speeds Uniform lubrication provides: • Even, uniform coverage, top and bottom • On-the-fly...

Open the catalog to page 2

MC800 Continuous Lubrication Systems - 3

MC800 System Operation The MC800 Series system operates up to eight valves. Precision flow controls permit the amount of lubricant applied by each valve to be adjusted independently. Valves can be mounted above or below the stock. When the MicroCoat system is initiated, steady air pressure supplied to the lubricant reservoir forces lubricant through the filter and flow controls, and out to the valves. As the line starts, a 3-way air solenoid activates the system. As the valves open, Low Volume Low Pressure (LVLP) air transfers a fine, consistent film of lubricant onto the stock surface....

Open the catalog to page 3

MC800 Continuous Lubrication Systems - 4

d Extenl Life Too 0% + ce 20 Reduposal Dis osts C 90% il Use ss O r Le er Ai Cleanand er Clean rts Pa se a Incre ress rm P eds Uniforicant Spe ub ating L o C ® MicroCoat MC800 Series MicroCoat valves MC785M: Standard valve Maximum coverage is 82.6 mm (3.25") MC785M-WF: Wide fan valve Maximum coverage is 165.1 mm (6.50") Valve specifications Size: 66.29 mm H x 49.28 mm W (2.61" x 1.94") Weight: 206.4 g (7.28 oz) Choose from a variety of reservoirs: 4 liter (1 gal.) or 8 liter (2 gal.) acrylic see-through tank 19 liter (5 gal.) or 76 liter (20 gal.) stainless steel tanks 24 liter (6 gal.)...

Open the catalog to page 4