Catalogs >
EFD >
Hand-actuated Valves Brochure

Hand-actuated Valves Brochure
8Pages

Catalog excerpts

752V-HL740V-HL725-HL Anaerobics ●■■ Key Copper brazing paste ■■● ● Recommended Cyanoacrylates ●■■ ▲ Satisfactory White glue ■●● ■ Do not use Grease ■●● Oils ●●● Paste flux ■●● Solvents ●●■ Vinyl adhesive ■●● Limitations > 1Fluid must be able to flow to the hand valve at 80 psi or below.2The fluid tube length,from the pressure reservoir to the hand valve,should notexceed 5 ft.unless the fluid is very low viscosity.3We recommend fluid containers,or disposable liners,be used in the reservoirs. 4The 725-HLis designed for higher flow rates,as compared to the 740V-HL.

Open the catalog to page 2

Shown actual sizeWeight: Note:The fluid input fitting islocated 90from the squeeze lever. hanger squeeze leverdispense tip 3.86 oz.(109.4 grams) Wetted Materials: polypropylene UHMW polyethylene >

Open the catalog to page 3

Shown actual sizeWeight: 4.61 oz.(130.8 grams) Wetted Materials: hard-coated aluminum Teflon > stainless steel hanger squeeze lever dispense tipNote:The fluid input fitting islocated 90ΰfrom the squeeze lever. >

Open the catalog to page 4

Shown actual sizeWeight: 13.76 oz.(390.18 grams) Wetted Materials: hard-coated aluminum polypropylene UHMW polyethylene stainless steel trigger grip hanger (not shown)dispense tip >

Open the catalog to page 5

#615DTH#626DTHTank body Each tank is shipped complete with constant bleed precision airregulator and gauge,air hose,liner and fluid feed tubing. cast aluminumcast aluminum Inside diameter 3.82 in.6.81 in. Inside depth 6.87 in.9.75 in. Replaceable liner polyethylenepolyethylene Liner capacity 0.95 liter3.8 liters Overall width 6.81 in.11.14 in. Overall height 14.01 in.15.98 in. Regulator & gauge 100 psi100 psi Maximum operating 100 psi100 psi pressureBottle size accepted 1 pound1 liter Model 615DTH:1.0 liter tank Model 626DTH: 5.0 liter tank #615DTL#626DTLRegulator & gauge 15 psi15 psi >...

Open the catalog to page 6