Catalogs >
EFD >
752V

752V
3Pages

Catalog excerpts

The 752V Series dispense valve systems accurately control the application of most low to medium viscosity fluids. The unique seal-less design incorporates an inert polymer diaphragm that isolates the actuator from the valve. Valve open time can be as short as 15 milli-seconds. The adjustable open/close stroke 0.13 to 0.64 mm (0.005” to 0.025”) means very fast response and positive shutoff. Model 752V-UHSS with UHMW* polymer wetted parts is used for dispensing solvents, cyanoacrylates, anaerobics and fluxes. A light blocking acetal valve chamber on the 752V-SS provides consistent, bubble-free dispensing of UV-cure polymers. *Ultra High Molecular Weight polyethylene Features • Compact size and weight • Adjustable fluid flow control • Positive shutoff, no seals • Diaphragm life exceeds 100 million cycles • Easy cleaning • FDA-compliant wetted parts • Cycle rate exceeds 500/minute • Low-maintenance design “After 100 million cycles, we took the 752V-UH apart to check it. No repairs or parts needed. Reassembled and had it back in operation in about 5 minutes.” Remington Arms 7021428 752V-UHSS Valve: UHMW fluid body and diaphragm 7021419 752V-SS Valve: Acetal copolymer fluid body and UHMW diaphragm 7021411 752V-DVD Valve: Tamper-resist stroke adjustment UHMW diaphragm and 303 stainless steel fluid body 7021427 752V-UHDVD Valve: UHMW fluid body and diaphragm 7021285 750V-SS Valve: UHMW fluid body and diaphragm 7015582 752V-SS-BP Valve: Acetal copolymer fluid body and UHMW diaphragm 7015583 752V-UHSS-BP Valve: UHMW fluid body and

Open the catalog to page 1

Model Item Product 752V Series Valves The 752V Series valves are used with ValveMate 8000 controllers or Nordson EFD Automated System for precise, repeatable outputs of low to medium viscosity fluids. The 752V Series wetted components are inert plastics and use the same actuating assembly and diaphragm. Each valve can be calibrated with the stroke reference knob for process control. The amount dispensed depends on valve open time, fluid pressure, fluid viscosity, flow adjustment and tip size. Maximum fluid pressure 70 psi (4.8 bar) Fluid inlet thread 1/8 NPT female Fluid outlet...

Open the catalog to page 2

ValveMate 8000 Controller Valve open time is the primary control of deposit size. The ValveMate controller puts push-button adjustment of valve open time where it needs to be — at the valve. • Multi-valve control- up to (4) valves • Partner to Programmable Logic Controller (PLC) • Easy deposit size control • Increased production output • End user convenience • On-the-fly adjustability • Maximum machine efficiency Free Process Evaluation Contact Nordson EFD to configure an automated dispensing system that meets your specific needs, with: • A complimentary process evaluation by experienced...

Open the catalog to page 3