a clear edge nXDS dry scroll pump Vacuum science... product solution.

a clear edge the intelligent choice

Edwards nXDS is the great new shape of dry vacuum pumping Edwards, a leading innovator in vacuum pump technology, is proud to present the new nXDS dry scroll pump range. With exceptional pumping capability, ultimate vacuum performance and state-of-the-art design features, Edwards nXDS is the best performing pump in its class. The nXDS is up to 20 times quieter than other pumps. Its intelligent control functions and up to five year service interval offer low cost of ownership, making it the small dry pump of choice for today’s most advanced technologies. Features and benefits • Advanced scroll-form...

Applications Mass spectrometry GCMS, LCMS, ICPMS, MALDI, RGA, surface science, leak detectors Gas recovery and recirculation, glove boxes, brake line and air conditioning evacuation, coating systems, freeze drying, gas bottle filling/emptying, refrigeration system manufacture, degassing/curing (oil, epoxy resin) Sample preparation Gel dryers, glove boxes, rotary evaporators, centrifuges Load locks and transfer chambers, turbopump backing Chamber evacuation, coating systems, turbopump backing Gel dryers, glove boxes, rotary evaporators, centrifuges, solvent recovery, distillation/extraction/ filtration...

Performance nXDS has been designed to combine the latest advances in Scroll technology with an intelligent inverter drive coupled with the long established truly dry hermetically sealed mechanism of the XDS series. Class leading pumping speeds are an improvement over existing XDS models and, with the inverter drive, are of course consistent worldwide. Likewise, ultimate vacuum pressures which are below 10-2 mbar are now comparable with those of oil-sealed rotary vane pumps – without the inconvenience of oil. nXDS is available in four sizes: Hermetic sealing ensures that the vacuum environment...

nXDS sectional view Optimum bearing placement for long lifetime and easy replacement High efficiency radial airgap motor for low power consumption Wide range voltage input with automatic selection for simple operation Easy to use manual control buttons Standby speed control buttons for efficient process tuning USB port for future connectivity

Optimised scroll profiles for each model to maximise performance Advanced tip-seal technology for long service lifetime Thermally controlled fan for reduced noise Hermetic bellows sealing for contamination free vacuum Remote control interface for convenience of operation

Nominal rotational speed Peak pumping speed mbar (Torr) Ultimate vacuum (total pressure) Minimum standby rotational speed Speed control resolution (percentage of full rotation speed) Max inlet pressure for water vapour Max water vapour pumping rate Maximum continuous inlet pressure Voltage input Voltage frequency Recommended fuse Inlet flange Exhaust flange Noise level** Leak tightness (static) Operating temperature range Vibration at inlet flange * Typical. See graphs on page 6. ** For low fan speed, typical at ultimate end when load/ambient conditions allow. Pumping speed and power curves nXDS10i...

All variants are the same Dimensions in mm (in) normal pumping speed normal full power normal pumping speed normal full power

Pump controller The advanced controller allows for several modes of control: Manual Push button START, STOP and STANDBY. Accurate speed control of 1% of maximum running speed. Parallel remote From your own control system via the 15 way d-sub connector giving the same START, STOP and STANDBY with the option of analogue speed control. Serial communication remote Option of either RS232 or RS485 with a choice of Edwards’ proprietary ‘DX’ protocol or industry standard Modbus protocol. A USB connector has been included for future connectivity. The pump controller is able to accept voltages from 100-127...

Ordering information Standard product Corrosion resistant (C) variants (R) Variants without gas ballast Controllers and accessories The TIC Turbo and Instrument Controller automatically recognises the nXDS pump when connected to the backing pump connector as the controller adopts serial communications mode when connected to the nXDS. There is no need to use a relay box to interface to nXDS. Speed control and pump run hours etc can be readily accessed from the display. The TIC can also control an nEXT turbopump plus as an option, up to three gauges at the same time as a nXDS pump. Customers already...

Global contacts Belgium United Kingdom Shanghai (toll free) 400 111 9618 United States www.edwardsvacuum.com [email protected] Publication Number: A73501895, Issue B. © Edwards Limited 2013. All rights reserved. Edwards and the Edwards logo are trade marks of Edwards Limited.