PRODUCT DATA SHEET ACTIVE INVERTED MAGNETRON (AIM) GAUGE Edwards Active Inverted Magnetron (AIM) Gauges provide accurate measurement over the vacuum range of 1 x 10 -2 to 1 x 10 -9 mbar. These gauges have proved to be rugged and reliable in a wide range of applications, ranging from scientific instruments to industrial processes. The AIM-X Gauge is an inverted magnetron gauge head and gauge controller combined into a single compact unit, and features a linear output for easy integration with a computer or PLC. The XL variants have a very low external magnetic field, these are ideally suitable for use with sensitive analytical instruments or in applications where the gauge needs to be mounted in close proximity to a turbomolecular pump. Features and benefits • Drive electronics combined in the gauge head –– Reduce the system cost –– Save valuable rack space • Wide-range, regulated, internal power supply –– Runs from standard d.c. power supplies +13.5 to +36 V –– Tolerant to voltage fluctuations • Standard analog output 0 to +10 V d.c. and gauge identifier –– Easy to interface with a computer or PLC –– Fault output indication • Low output impedance and integral Faraday shield –– Provide high level of noise immunity –– Permit long cable runs (up to 100 m) • Interchangeable body tube –– Rapid tube replacement without pre-calibration –– Electrode service kit allows user cleaning and maintenance • Bakeable Tube –– The DN40CF tube is bakeable to 300 °C (with the electronics removed) • Unique striker design –– Ensures rapid striking even at high vacuum or in contaminating conditions • CSA, C/US Approved ––

Technical data Pressure range Materials exposed to vacuum Ordering information * Supplied with a certificate of calibration traceable to national standards GLOBAL CONTACTS Publication Number: 28 1450 1600 © Edwards Limited 2016. All rights reserved Edwards and the Edwards logo are trademarks of Edwards Limited Whilst we make every effort to ensure that we accurately describe our products and services, we give no guarantee as to the accuracy or completeness of any information provided in this datasheet. Edwards Ltd, registered in England and Wales No. 6124750, registered office: Innovation Drive, Burgess...