Active digital controller Edwards Active Digital Controller (ADC) is a compact single line vacuum gauge controller and display, featuring a bright LED display and simple push-button controls. The ADC automatically recognises compatible Edwards gauges, loads the appropriate look-up table and displays the pressure in commonly used vacuum units. The ADC is available in standard and MkII enhanced versions. The ADC standard controller displays the pressure measured by a single active gauge. The MkII enhanced controller now supports two different gauges with two variable hysteresis set-points which are linked to 48 V dc 1A changeover relays and two 0-10 V dc analog outputs. To aid system integration the enhanced controller is provided with an RS232 interface. When combined with suitable gauges such as the Edwards APG100 Pirani, AIM Inverted Magnetron or Wide Range Gauge (WRG), the ADC represents a cost effective means of monitoring and controlling process vacuum in a broad range of applications. Features and benefits • Plug and Go operation ͳͳ Simply plug in the mains supply, connect the gauge and the ADC displays the measured pressure • Wide pressure range ͳͳ ADC supports Edwards gauges with a total measuring range of 2000 to 1 x 10 -9 mbar (1500 to 7.5 x 10 -10 Torr) ͳͳ ADC and Edwards gauges address a broad spectrum of laboratory and industrial applications • New multiple gauge ability ͳͳ The new enhanced ADC MkII can now support two different gauges making it a more versatile instrument controller • High visibility display ͳͳ Bright LED display gives clear long distance readability product datasheet • Choice of units ͳͳ ADC displays in mbar, Torr, Pascal or Volts • Compact instrument ͳͳ Small 1/8 DIN enclosure, may be panel or bench mounted • Very simple to use ͳͳ Push-button control makes operation highly intuitive Vacuum science... product solution.

Mkll enhanced version SERIAL COMMS Enter/Select button Turn the selected gauge on or off Edit the selected numerical item Move to the next digit of a numerical value Move to previous selection Scroll selected numerical values up Scroll down button Move to next selection Scroll selected numerical values down G1 & 2 Indicates gauge displayed SP1 &2 Indicates set-point trip Hi, Lo Indicates high and low set-point threshold for setting up CAL Indicates calibrate message sent to gauge (remote calibration supporting gauges only)

Common interfaces and configuration details Standard Active gauge compatibility Display Electrical supply Serial interface Logic interface APG100, APGX-H, WRG and the following legacy gauges - APG-L, APG-MP, APG-M, APGX-L, APGX-MP and APGX-M AIM-S, AIM-X and ASG High brightness green LED display 12mm (0.47” high) Units - mbar/Torr/Pa/Volts 100 to 240V AC 47 to 63 Hz RS232 serial interface allows the ADC to be linked to a PC, PLC or OEM system controller RS232 Protocol - 9600 baud, 1 stop bit, 8 data bits, no parity May be used either to link to system relays, or a higherlevel control system and...

Environment and standards compliance Operating and storage data Operating temperature Max ambient operating humidity Electrical safety Electrical noise immunity BS EN 61326 (Industrial location, class B emissions) Flame retardant case materials Enclosure rating Storage temperature Ordering information Product description Order number Controllers ADC standard ADC MkII Enhanced Certificated Controllers Controllers are supplied certificated traceable to national standards ADC standard, Certificated ADC MkII Enhanced, Certificated The above controllers are certificated on their own without gauges....