BELLS & BUZZERS AdaptaBuzzerTM Weatherproof DC & AC Models B-8698 & B-8699 Series FEATURES Edwards B-8698 & B-8699 AdaptaBuzzers are the finest, heavy duty buzzers available. Sound is produced by the hammer action of a vibrating armature against the cover and starts and stops instantly with current impulse. The cover is secured to the unit's cast box by a cast aluminum threaded ring and sealed with a neoprene gasket. Two mounting lugs are provided for wall mounting. A 1/2" (13mm) tapped conduit entrance is provided on one side for field wiring. Wiring connections are made in the base and the cover assembly plugs into a receptacle in the base. > Heavy gauge steel cover > Die cast aluminum housing > Vibrating armature > Gray finish AGENCY APPROVALS > B-8699 Series UL 464 Listed > NEMA Type 3R Ideal for use in areas where a louder signal would be distracting. Often used for timing, scheduling, paging, and general alarm applications. Typical indoor and weatherproof installations include construction sites, shipping docks, and paper mills. Tap 1/2" (13mm) IP 5 1/2" (140mm) 6 3/8" (162mm) 5 3/8" (137mm) 3" (76mm) 2 holes 3/8" (10mm) dia. Amps VA DC Coil Res (ohms) dB at 1m / 10 ft. B-8698-E1 B-8698-G1 B-8698-P1 B-8698-S1 12V DC 24V DC 125V DC 240V DC 1.5 1.0 0.2 0.1 18 24 25 24 4.8 21.5 103 600 95/89 75 db min. B-8699-G5 B-8699-N5 24V AC 60 Hz 120V AC 60 Hz 1.1 0.2 26.4 24 5.0 146 95/89 75 db min. 90 Fieldstone Court | Ph: 203.699.3300 | Cheshire, CT 06410 Fx: 203.699.3108 www.edwards-signals.com 5-29 © Copyright 2004 Edwards D-04 Volts Cat No.