Rebel V-65 Servo
4Pages

The Rebel V-65 Servo is a compact bar loading systems for CNC lathes. With a large magazine capacity allowing for long unattended operation, the Rebel V-65 combines the advantages of auto bar loading with a small footprint and an economical price.

The Rebel V-65 Servo is an automatic Bar Loading Magazines for processing bars in the diameter range of 5 to 65mm and in lengths up to 1520mm on CNC lathes. Quick and Easy Programming User friendly software delivers fast set-up on easier jobs and powerful advanced features for more sophisticated demands. Axial Shift The axial shift allows for maintenance access to the back of the lathe spindle. The axial track is standard in X axis. Pusher Storage Special rack holds 2 pushers while the 3rd is in use. 6,12 and 19mm pushers included. Audible Alarm Triggered by E Stop or fault. Free Of Noise...

Rebel V-65 Servo Features Control Easy Access Panel Mitsubishi PLC Feed Force Parameters setting allows for feed force adjustment and bar diameter. Sub-spindle mode allowing you to “feed-on-the-fly” using your lathe’s sub-spindle. Fixed piece feedout eliminates the need for a stock stop by allowing you to program a feedout value. Linear Feed & Servo Drive The bar stock is loaded into the main spindle of the lathe by a linear feed mechanism with a toothed belt and servo motor. This allows for the feeding of the bar stock into position with or without the use of a fixed bar stop. Adjustable...

Rebel V-65 Servo & Ecofeed Specifications Rebel V-65 Servo Technical Data 2 Size Barfeeders Available 1.2 Meter (Bar Length) Rack Capacity X-Axial Track Travel Bar Diameter 5mm (.196”) - 65mm (2.56”) Rapid Return Rate 1300mm/sec. Bar Change Time Approx 20 sec. Operating Voltage 230V-60Hz single phase Rack Capacity X-Axial Track Travel Air Supply 70-100 psi (3) Bar Pushers 6,12,19mm Weight 550 lbs. *The maximum bar length must not exceed the measured length from front of chuck jaw/collet to rear of headstock guard. Positioning Accuracy First Infeed +/- .020” +/- .100” in cycle Bar material...