Rebel 102 Servo SE The Rebel 102 Servo SE is a compact bar loading system for CNC lathes. With a large magazine capacity allowing for long unattended operation, the Rebel combines the advantages of auto bar loading with a small footprint and an economical price.

The Rebel 102 Servo SE is an automatic Bar Loading Magazine for processing bars in the diameter range of 8 - 102mm and in lengths up to 1520mm (5’) on CNC lathes. Linear Feed & Servo Drive The bar stock is loaded into the main spindle of the lathe by a linear feed mechanism with a toothed belt and servomotor. This allows for the feeding of the bar stock into position without the use of a fixed bar stop. Free Of Noise And Vibration The rotating stock does not come in contact with the loading magazine allowing high speed machining, especially in hex, square, or profiled stock. Spindle Liner Access...

Rebel 102 Servo SE Technical Data Options Available Z axial shift device Lathe spindle liners Rack Capacity X & Z Axial Track Travel Magazine extension rack Rapid Return Rate 1300mm/sec. (4’/sec.) Special Application Shaft Load (Rebel 102 SA) Bar Change Time Approx. 20 seconds Operating Voltage Electric supply 230V (60HZ) Bar material storage in the rear Bar Pushers 10mm dia. Hardened steel 19mm dia. Hardened steel Weight 1100 lbs. *The maximum bar length must not exceed the measured length from front of chuck jaw/collet to rear of headstock guard. 1723mm (68.92”) Technical data subject to change...