■ Screw flange M18x1,5 / M30x1,5 or plug-in flange 018 ■ Sensor working temperature up to 150°C

LVDTs (Linear Variable Differential Transformers) are inductive sensors excellent for use in harsh industrial environments, e.g. high temperature and pressure ranges, as well as high accelerations and measuring cycles. The SM-series offers ultimate reliability and precision in a small size, and is designed for industrial- and lab use. The sensors can also be used under water because of their high protection class. IMCA and KAB electronics (explanation see page 5) have a built-in cable breakage monitoring and are entirely galvanically isolated. The signal output is optimized for interference compatibility...

SM-HYD SERIES I TECHNICAL DIMENSIONS 3 other ranges on request Cable output PLUG-IN FLANGE S18 WITH RADIAL CABLE OR RADIAL CONNECTOR OUTPUT

4 INSTALLATION DRAWING I SM-HYD SERIES * note: Rz = 1,6 for non pulsating pressure Rz = 0,8 for pulsating pressure CABLE/PIN ASSIGNMENT (AC OUTPUT) connector output type MIL-5015 for flange M18 / M30 connector output, type M12 for flange M18 / M30 connector output, type Lemo for flange S18 Primary + white white 2 Primary - brown yellow 1 Secondary 1 blue brown 3

DEEneo, DEEneo-ISC | ELECTRONICS DEENEO | DEENEO-ISC The DEEneo signal conditioner was developed for operating inductive LVDT sensors (full bridge). The electronics supply the sensor and convert the sensor signal into a standardized, analogue output signal with the help of a microcontroller. A push button (SET button) is used for the basic configuration and to set the measuring range limits - this enables quick and easy adaptation to the customer‘s application. Where possible, eddylab calibrates the sensor and electronics together. The sensor characteristic curve can be linearized to meet the...

6 ACCESSORIES I SM-HYD SERIES CABLE M12 ANGULAR CONNECTOR

SM-HYD SERIES I ORDER CODE 7 ORDER CODE SENSOR SM X HYD X X X X X X measurement ranges [mm] cable / connector output 18 = thread M18 x 1,5 30 = thread M30 x 1,5 S18 = plug-in flange 018 M12= connector output (M12) K = cable output S2: sensor with cable output, open cable end for DEEneo D = PTFE-UL cable 2 m (option H) E = PTFE-UL cable 5 m (option H) F = PTFE-UL cable 10 m (option H) S3: sensor with cable output for DEEneo-ISC K = PTFE-UL cable 2 m (option H) L = PTFE-UL cable 5 m (option H) M = PTFE-UL cable 10 m (option H) temperature range 1 = standard body length 2 = short body length ORDER...

eddylab GmbH