![eddylab GmbH - logo](https://img.directindustry.com/images_di/logo-p/L188286.gif)
![video corpo](https://img.directindustry.com/media/ps/images/common/stand/video-icon.gif)
Catalog excerpts
![SM-F18 SERIES - 1](https://img.directindustry.com/pdf/repository_di/188286/sm-f18-series-875887_1m.jpg)
SM-F18 SERIES | LVDT Inductive Position Transducer: Designed for integration into hydraulic and pneumatic cylinders or servo valves. ■■ M18x1,5 mm integral thread ■■ Linearity up to ±0.10 % of full scale ■■ Operating pressure 150 bar ■■ Protection class IP67 or IP68 ■■ Max. temperature up to +200 °C
Open the catalog to page 1![SM-F18 SERIES - 2](https://img.directindustry.com/pdf/repository_di/188286/sm-f18-series-875887_2m.jpg)
2 TECHNICAL DATA | SM-F18 SERIES LVDTs (Linear Variable Differential Transformers) are inductive sensors excellent for use in harsh industrial environments, e.g. high temperature- and pressure applications, as well as high accelerations and measuring cycles. The SM-F18 series offers ultimate reliability and precision in a small size, and is designed for industrial and lab use. The position transducer is a pressurized hydraulic model up to 150 bar for installation directly in hydraulic and pneumatic cylinders. The sensors can also be used under water because of their high protection class....
Open the catalog to page 2![SM-F18 SERIES - 3](https://img.directindustry.com/pdf/repository_di/188286/sm-f18-series-875887_3m.jpg)
SM-F18 SERIES | TECHNICAL DIMENSIONS TECHNICAL DIMENSIONS RANGE (FS) CABLE/ CONNECTOR RADIAL [MM] SPRUNG LOAD MECHANICS [MM] Other measurement ranges are available on request. ■■ TYPE: FREE CORE (D), PUSH ROD UNGUIDED ■■ AUSFÜHRUNG: STÖSSEL GELAGERT ■■ TYPE: PUSH ROD GUIDED ■■ TYPE: SPRING LOADED Please note that the stated end travel and start travel (see detailed picture) are standard values. When calibrating the sensors we are aiming for
Open the catalog to page 3![SM-F18 SERIES - 4](https://img.directindustry.com/pdf/repository_di/188286/sm-f18-series-875887_4m.jpg)
4 SENSOR TYPES | SM-F18 SERIES SENSOR TYPES ■■ CABLE /CONNECTOR OUTPUT AXIAL /RADIAL Sensors with cable output have a cable fitting and a spring for bend protection of the cable. For installation, the bending radius should not be less than 3 times the cable diameter. The standard cable length is 2 m. Instruments with option H for temperatures up to 150 °C/ 200 °C feature a PTFE cable. ■■ CONNECTOR OUTPUT (CABLE WITH STRAIGHT OR ANGULAR CONNECTOR) For sensors with connector output the cable has to be ordered separately. You can choose from a cable with a straight connector or with an angular...
Open the catalog to page 4![SM-F18 SERIES - 5](https://img.directindustry.com/pdf/repository_di/188286/sm-f18-series-875887_5m.jpg)
assignment for TPE-cable: white (5): primary 2 black (6): secondary 2 brown (9): primary 1 blue (8): secondary 1 assignment for PTFE-cable: white (5): primary 2 green (6): secondary 2 yellow (9): primary 1 brown (8): secondary 1 If not specified otherwise the cable electronics is placed at 1 m from the end of the cable. ■ Connection The external electronics IMCA is designed to be installed in switch cabinets (Din-rail mounting). The connection to the sensor is conducted as connector with push-in spring connection. At harsh EMC environments, it is possible to install the electronics at a...
Open the catalog to page 5![SM-F18 SERIES - 6](https://img.directindustry.com/pdf/repository_di/188286/sm-f18-series-875887_6m.jpg)
ADJUSTMENT OF ZERO POINT AND GAIN Each sensor, manufacted by eddylab, is basically adjusted and calibrated. You will receive a traceable calibrated measurement equipment, adjusted and tested in the company‘s own high-end calibration laboratory, and a calibration certificate. Please note: If the zero point or gain is changed the calibration certificate will lose validity. The potentiometers shall be protected by a label against unauthorised access. In some cases, it is necessary to adjust the zero point and gain, e.g. with hydraulic cylinders or reduced measurement ranges. In this case, the...
Open the catalog to page 6![SM-F18 SERIES - 7](https://img.directindustry.com/pdf/repository_di/188286/sm-f18-series-875887_7m.jpg)
SM-F18 SERIES I ORDER CODE 7 ORDER CODE SENSOR SM X _ X _ X -F18- X X X X X X X measurement ranges [mm] ^d^ cable / connector output 50 / 100 /200 1 = radial connector output M12 (no cable) ^b) type A = free core (c) cable/ connector KA = axial cable output KR = radial cable output S2: sensor with cable output, open cable end (for IMCA) A = TPE cable 2 m D = PTFE-UL cable 2 m (option H) E = PTFE-UL cable 5 m (option H) F = PTFE-UL cable 10 m (option H) S3: sensor with cable output for KAB G = TPE cable 2 m K = PTFE-UL cable 2 m (option H) L = PTFE-UL cable 5 m (option H) M = PTFE-UL cable...
Open the catalog to page 7![SM-F18 SERIES - 8](https://img.directindustry.com/pdf/repository_di/188286/sm-f18-series-875887_8m.jpg)
E-mail: info@eddylab.de Internet: www.eddylab.de
Open the catalog to page 8All Eddylab GmbH catalogs and technical brochures
-
Inductive sensor SM
8 Pages
-
Product Overview
16 Pages
-
eddycurrent probes CT series
7 Pages
-
TX Series - EDDY CURRENT PROBES
20 Pages
-
TX LVDT Digital Controller
8 Pages
-
Laser sensors AXIS SERIES
11 Pages
-
LH70/LH71 - Magnescale ®
4 Pages
-
SL inductive transducer
8 Pages
-
AX Series
8 Pages
-
MAGNESCALE
11 Pages
-
SM-HYD
8 Pages
-
Serie REX-D
8 Pages
-
DIGITAL DISPLAY
6 Pages
-
SM-F14 SERIES
8 Pages
-
AX-turbo Eddy Current Probe
6 Pages
-
SM-F18
8 Pages
-
Inductive sensor SL
8 Pages
-
Inductive Sensor SLT
8 Pages
-
DT series DMAGNESCALE
13 Pages
-
PL101 - Magnescale ®
8 Pages
-
MB-LK, MB-LKM ®
6 Pages
-
PL81, PL82 - Magnescale ®
6 Pages
-
SR-series Magnescale ®
16 Pages
-
REX-Series
8 Pages
-
PMX-24
4 Pages
-
PAXI
6 Pages
-
PAX P, DP
6 Pages
-
LG20 - Magnescale ®
4 Pages
-
SJ-700A - Magnescale ®
4 Pages
-
GB-ER - Magnescale ®
6 Pages
-
DK800S Series - Magnescale ®
8 Pages