■ Working temperature up to 200 °C ■ Customized versions availableJ

2 TECHNICAL DATA I SLT SERIES in harsh industrial environments, e.g. high temperature and pressu-a fully stainless steel housing which makes them suitable for harsh LVDTs (Linear Variable Differential Transformers) are inductive sensors excellent for use re ranges, as well as high accelerations and measuring cycles. Based on the SL series, the SLT probes are also characterized by an ultra robust construction and environments. The combination of a hardchrome plated shaft with 6 mm in diameter and precision bearings guarantees highest resistance to lateral forces on the push rod. There are three...

SLT SERIES | TECHNICAL DRAWINGS TECHNICAL DRAWINGS RANGE (FS) [MM] TYPE: SPRING LOADED TYPE: PNEUMATIC ACTUATED PR1 (PRESSURIZED AIR EXTENDS PUSH ROD) TYPE: PNEUMATIC ACTUATED PR2 (PRESSURIZED AIR RETRACTS PUSH ROD)

4 SENSOR TYPES I SLT SERIES SENSOR TYPES■ CONNECTOR / CABLE OUTPUT RADIAL Sensors with cable output have a cable fitting and a spring for bend protection of the cable. The standard cable length is 2 m. For sensors with connector output the cable has to be ordered separately. You can choose from a cable with a straight connector or with an angular connector. The connector is protected from accidental removal by a threaded fitting (M12). When bolted, the connector pair has the protection class IP67.

DEEneo, DEEneo-ISC I ELECTRONICS 5 The DEEneo signal conditioner was developed for operating inductive LVDT sensors (full bridge). The electronics supply the sensor and convert the sensor signal into a standardized, analogue output signal with the help of a microcontroller. A push button (SET button) is used for the basic configuration and to set the measuring range limits - this enables quick and easy adaptation to the customer's application. Where possible, eddylab calibrates the sensor and electronics together. The sensor characteristic curve can be linearized to meet the highest demands on...

MOUNTING PARTS Flanschklemmstück 16-VA / 20-VA, flange clamp material: stainless steel, temperature resistant up to 200 °C Fußklemmstück 16-VA / 20-VA, base clamp material: stainless steel, temperature resistant up to 200 °C Flanschklemmstück 20-AL, flange clamp material: aluminium, temperature resistant up to 120 °C Flanschklemmstück 16-AL, flange clamp material: aluminium, temperature resistant up to 120 °C Fußklemmstück 16-AL, base clamp material: aluminium, temperature resistant up to 120 °C Fußklemmstück 20-AL, base clamp material: aluminium, temperatu

■ CONNECTION CABLE (SHIELDED) FOR CONNECTOR OUTPUT CABLE M12 WITH STRAIGHT CONNECTOR CABLE M12 WITH ANGULAR CONNECTOR FEELER MATERIAL OF TASTKOPF-01 FEELER BALLS: steel: for standard applications ruby: much harder and wear resistant than steel, non-conductive, for all applications except for measuring on aluminium and cast iron ceramics: comparable to ruby, best choice for measuring on aluminium and cast iron

8 ORDER CODE I SLT SERIES measurement ranges [mm] cable / connector output 200 / 300 1 = radial connector output M12 (no cable) S2: sensor with cable output, open cable end for DEEneo D = PTFE-UL cable 2 m (option H) E = PTFE-UL cable 5 m (option H) F = PTFE-UL cable 10 m (option H) S3: sensor with cable output output for DEEneo-ISC K = PTFE-UL cable 2 m (option H) L = PTFE-UL cable 5 m (option H) M = PTFE-UL cable 10 m (option H) temperature range ORDER CODE ELECTRONICS DEEneo - X DEEneo = external electronics DEEneo-ISC = inline signal conditioner output signal 020A = 0...20 mA type of cable...