Catalogs >
eddylab GmbH >
SL inductive transducer

SL inductive transducer
8Pages

Catalog excerpts

SL SERIES | LVDT The SL series offers an ultra-robust, stable construction and features a complete stainless steel housing. Predestined for use in harsh industrial enviroments. ■ Measurement ranges 10...600 mm ■ Housing ø20 mm ■ Linearity up to ±0,10 % of full scale ■ Protection class IP67, optional IP68 ■ Sensor working temperature up to 200 °C ■ External, or cable electronics with cable break detection ■ Customized vers

Open the catalog to page 1

2 TECHNICAL DATA | SL SERIES LVDTs (Linear Variable Differential Transformers) are inductive sensors excellent for use in harsh industrial environments, e.g. high temperature and pressure ranges, as well as high accelerations and measuring cycles. The SL series offers ultimate reliability and precision in a small size, and is designed for industrial and lab use. The sensors can also be used under water because of their high protection class and the stainless steel housing. The IMCA and KAB electronics (explanation see page 5) have a built-in cable breakage monitoring and are entirely...

Open the catalog to page 2

SL SERIES | TECHNICAL DRAWINGS TECHNICAL DRAWINGS RANGE (FS) [MM] Other measurement ranges are available on request. ■ TYPE: FREE CORE, PUSH ROD ■ TYPE: GUIDED PUSH ROD push rod supported by Iglidur bearings, push rod completely extricable

Open the catalog to page 3

4 SENSOR TYPES | SL SERIES SENSOR TYPES ■ CABLE OUTPUT RADIAL Sensors with cable output have a cable fitting and a spring for bend protection of the cable. For installation, the bending radius should not be less than 3 times the cable diameter. The standard cable length is 2 m. Instruments with option H for temperatures up to 150 °C feature a PTFE cable. Sensors have a through hole. Please use this type for application at heavy dirt exposure. The movement of the push rod removes the dirt from the sensor and conveys it to the rear. The variant G (rod end bearings) is closed on the rear end...

Open the catalog to page 4

CABLE ELECTRONICS KAB FUNCTION CABLE PTFE-UL If not specified otherwise the cable electronics is placed at 1 m from the end of the cable. EXTERNAL ELECTRONICS IMCA external electronics IMCA (for DIN-rail mounting) The external electronics IMCA is designed to be installed in switch cabinets (Din-rail mounting). The connection to the sensor is conducted as connector with push-in spring connection. At harsh EMC environments, it is possible to install the electronics at a max. distance of 100 m in a switch cabinet. A twin twisted pair cable (4-cores, minimum cross section 0,5 mm²), single or...

Open the catalog to page 5

6 CABLE BREAK DETECTION | SL SERIES ADJUSTMENT OF ZERO POINT AND GAIN (OPTIONAL) Each sensor, manufacted by eddylab, is basically adjusted and calibrated. You will receive a traceable calibrated measurement equipment, adjusted and tested in the company‘s own high-end calibration laboratory, and a calibration certificate. Please note: If the zero point or gain is changed the calibration certificate will lose validity. The potentiometers shall be protected by a label against unauthorised access. In some cases, it is necessary to adjust the zero point and gain, e.g. with hydraulic cylinders or...

Open the catalog to page 6

■ MOUNTING PARTS ■ Flanschklemmstück 2030, flange clamp ø20 mm for SL-series material: reinforced polyamide ■ Fußklemmstück 2030, base clamp ø20 mm for SL-series material: reinforced polyamide ■ CONNECTION CABLE (SHIELDED) FOR CONNECTOR OUTPUT CABLE M12 WITH ANGULAR CONNECTOR CABLE M12 WITH STRAIGHT CONNECTOR ■ MATING CONNECTOR M12 (SHIELDED) STRAIGHT CONNECTOR D4-G-M12-S Protection class Temperature range spring closure construction Cable diameter Conductor

Open the catalog to page 7

8 ORDER CODE | SL SERIES ORDER CODE SENSOR SL d cable / connector output S1: sensor with connector output 1 b type A = free core radial connector output M12 (no cable) S2: sensor with cable output, open cable end (for IMCA) A 2 = wiper ring (option W) S3: sensor with cable output for KAB G = TPE cable 2 m H = TPE cable 5 m J K = PTFE-UL cable 2 m (option H) L = PTFE-UL cable 5 m (option H) M = F = PTFE-UL cable 10 m (option H) temperature range E = PTFE-UL cable 5 m (option H) D = PTFE-UL cable 2 m (option H) PTFE-UL cable 10 m (option H) ORDER CODE ELECTRONICS IMCA 24V b = external...

Open the catalog to page 8

SL inductive transducer 8Pages

Catalog excerpts

All Eddylab GmbH catalogs and technical brochures

SL inductive transducer
8Pages