Reading head Series PL101 Magnetic tape Series SL700 Interpolator Series MJ Key-Features: - Resolution up to 0.2 pm - Accuracy ±10 pm in combination with SL700 - Analogue output signal (1V p-p), or A/B quadrature output signal (TTL, RS422) - Reference point: none, one, multi and reference mark - Protection class up to IP67 - Displacement speed up to 384 m/min - Working temperature 0...+45°C - resistant against dirt, water, oil, vibrations and shock - Magnetic tape SL700: range up to 100 m := eddyLab

TECHNICAL DATA READING HEAD PL101-RH Interpolator ±10 µm (in combination with magnetic tape SL700) depends on length magnetic tape (see table below) Protection class Compatible magnetic tapes In combination with Interpolator MJ600: 1 (please specify when ordering) max. 384 (at resolution 1 µm when used dependent on the chosen phase difference in combination with Interpolator MJ600/620) Displacement speed [µm] Distance tape-Reading head In combination with Interpolator MJ500: 2 or 10 and resolution (see table below) Reference point SL700: without, SL710: 1 reference point, SL720: Multi- reference...

Output signal PL101-RH without Interpolator: 1 V peak-peak analog output differential output Connection, Mini DIN 8 PIN connector green purple Output signal PL101-RA, PL101-RHA with Interpolator MJ623 connector output (Honda Tsushin, 20 PIN connector, PCR-E20PMRS) Output signal PL101-RA, PL101-RHA with Interpolator MJ623 cable with ends

TECHNICAL DATA MAGNETIC TAPE SERIES SL700 Model Reference point 1 (please specify position) Multi reference points Reference mark 60 mm pitch from the left end Reference point accuracy Accuracy (20°C) ±10L µm (L≤ 3 m) / ±(10L + 2.5 N) µm (L> 3 m) in combination with PL101, (L: see table page 2) Effective length Total length Working temperature Storage temperature Expansion coefficient Reference mark SL730 Reference mark pitch Important note: Install this product on top of non-magnetic material. If installing on top of magnetic material insert a non-magnetic layer having a thickness of at least...

SYSTEM CONFIGURATION System Configuration PL101-RA, PL101-RHA

Additional accessories ORDER CODE MAGNESCALE PL101-RA, PL101-RHA

OVERVIEW MAGNESCALE MAGNETIC TAPE SL700-/710- OVERVIEW MAGNESCALE READING HEAD PL101-RH without Interpolator, IP67, output 1 Vpp Extension cables Mounting Plate for PL101 Series Extension cable 1 m (qualified for drag chain use) Extension cable 3 m (qualified for drag chain use) Extension cable 5 m (qualified for drag chain use) Extension cable 10 m (qualified for drag chain use) Subject to change without prior notice. eddylab GmbH Ludwig-Ganghofer-Str. 40 83624 Otterfing E-mail [email protected] Internet www.eddylab.de