PAXI
6Pages

Catalog excerpts

Content: Technical Data Technical Drawing Electrical Connection Plug-in Cards Programming & Software Order Code & Accessories Serie PAX I Key-Features: - 6 digits, 14 mm high LEDs, annunciators - 2 independent inputs - Input signals TTL, NPN- and PNP-Sensors - Measurement frequency max. 34 kHz - 3 programmable user inputs - Protection class IP65 - Working temperature 0 to 50 °C, - Easy programming directly, or via PC ■2 - Plug-in output-cards: analog, USB, ■3 Relay (thresholds), Transistor, RS232, Profibus .4 - Summation, min-/max value display .5 - 10 point scaling for non-linear processes

Open the catalog to page 1

TECHNICAL DATA Display 6 digits, 14 mm high, red LEDs Panel cut-out A, B, C (counter), SP1, SP2, SP3, SP4 (the respective output is active) Programmable user inputs 3, logic state: jumper selectable for sink/source logic PNP: active Vin >2.4 VDC, inactive Vin <0.9 VDC, NPN: active Vin <0.9 VDC, inactive Vin >2.4 VDC Input signal incremental sensors with TTL signal, NPN and PNP sensors (settings by DIP switches) Output signal (via plug-in cards) Relay output, transistor output, analog output Serial Interfaces (via plug-in cards) USB port (programmable), RS485, RS232, Profibus Prescaler...

Open the catalog to page 2

- black powder coating - internal grounding terminal. - protection class: IP65 - dimensions: (W x H x D) 168 mm x 83 mm x 220 mm - delivery: housing, mounting material - without cable passages (must be drilled individually) - The housing is suited for all displays with front dimensions 96 x 48 mm - self assembly - dimensions: (W x H x D) 114 mm x 62 mm x 176 mm - delivery: housing, mounting material

Open the catalog to page 3

The display can be fitted with up to three optional plug-in cards. The details for each plug-in card can be reviewed in the specification section below. Only one card from each function type can be installed at one time. The plug-in cards can be installed initially or at a later date. Analog Output Card (retransmitted linear DC output): PAXCDL10 - Types: 0 to 20 mA, 4 to 20 mA, or 0 to 10 VDC. - Isolation to sensor + user input commons: 500 Vrms for 1 min., working range 50V, not isolated from all other commons. - Accuracy: 0.17 % of FS (10 to 28 degree Celsius), 0.4% (0 to 50 degree...

Open the catalog to page 4

PROGRAMMING Directly by the displays keys The meter normally operates in the Display Mode. No parameters can be programmed in this mode. The Programming Mode is entered by pressing the PAR key. If it is not accessible then it is locked by either a security code, or a hardware lock. Two types of programming modes are available. Quick Programming Mode permits only certain parameters to be viewed and/or modified. All meter functions continue to operate except the front panel keys change to Programming Mode Operations. Quick Programming Mode is configured in Module 3. Full Programming Mode...

Open the catalog to page 5

Plug-in cards Software PAXCDC20 Serial communication card RS232, terminal ProLOG on request PAXCDS10 Dual relay, Form-C, normally open & closed PAXCDS20 Quad relay, Form-A, normally open only PAXCDS30 Quad sinking NPN open collector PAXCDS40 Quad sourcing PNP open collector PAXCDC2C Serial communication card RS232, 9 pole SUB-D connector Miscellaneous Housings PAXLBK10 Units label kit GEH0IP65 Aluminium housing, IP65 Einstellung Pre-adjustment according to customer demands TG9648 Table housing Subject to change without prior notice. eddylab GmbH...

Open the catalog to page 6

PAXI 6Pages

Catalog excerpts

All Eddylab GmbH catalogs and technical brochures

PAXI
6Pages