MG-40 series Multi point measuring device - Magnescale ®

1 / 6 PagesView full catalog

MG-40 series Multi point measuring device - Magnescale ®

Product catalog summary

Key Features:

Supports connection of up to 100 gauges with high-speed data communication.
Compatible with Ethernet and CC-Link, operating voltage between 12 - 24 VDC.
DIN rail mounting with capabilities to measure current, minimum, maximum, peak-to-peak values, and comparator judgement results.
Comparator settings can be customized for each of the 100 axes.

Specifications:

Communication methods include MG41-NC (CC-Link/Ethernet) and MG41-NE (Ethernet).
System supports up to 24 connected MG42 hub units.
Data fetching capacity of 10 Mbps, with a maximum of 10,000 data/sec when 100 axes are connected.
Peak-hold function and comparator function for data comparison and measurement.
Reset, datum-point setting, reference point, and master calibration functions available.

System Structure:

Includes Ethernet and CC-Link connectivity.
MG41 main unit and MG42 hub unit are integral components.

Technical Data:

Operating temperature range: 0 to +50°C, storage range: -10 to +60°C.
Power consumption: MG41 main unit at 4W, MG42 hub unit at 1W/unit.
Mass: MG41 at 300g, MG42 at 250g.

Connecting the Units:

Link cable MZ is used for connecting MG42 hub units, supporting up to 100 axes.
Power can be supplied to a maximum of six MG42 hub units from the MG41 main unit.

Order Codes:

Various link cables (MZ41 series) and extension cables (CK-T series) are available for module interconnection and extension.

Catalog excerpts

MG-40 series Multi point measuring device - Magnescale ®-1

Content: Technical Data System Structure Dimensions Connecting the Units Order Codes MAGNESCALEIntelligent Network System for DK Gauges MG 40 Series Key-Features: - Up to 100 gauges can be connected - High speed data communication - Compatible with Ethernet an cc-Link - Operating voltage: 12 - 24 VDC - DIN rail mounting - Current, minimum, maximum, peak-to-peak values and comparator judgement results 2 - Comparator setting values can be made for each .4 - For all digital gauges series DK800S and DK

Open the catalog to page 1

MG-40 series Multi point measuring device - Magnescale ®-3

Gauge (DK series) up tp 4 axes Power: DC+12-24V Power supply by link cable will be max. 6 units available Gauge (DK series) up tp 4 axes

Open the catalog to page 3

MG-40 series Multi point measuring device - Magnescale ®-4

DIMENSIONS MG41-NC: Main unit (for CC-Link) MG41-NE: Main unit (for Ethernet)

Open the catalog to page 4

MG-40 series Multi point measuring device - Magnescale ®-5

CONNECTING THE UNITS Connection by link cable MZ: If the MG42 hub unit is connected by a link cable, up to 100 axes of measuring units can be connected. Connect the link cable MZ (sold separately) to the link connector. If the MG42 hub unit will not be connected by a link cable, connect the terminal connector (supplied) to the link connector (LINK IN). If the MG42 hub unit is connected by a link cable, connect the terminal connector to the link connector (LINK OUT) of the MG42 hub unit at the end. Note: Do not remove the link cable while the power is on. Disconnecting the cable will cause a communication...

Open the catalog to page 5

MG-40 series Multi point measuring device - Magnescale ®-6

ORDER CODE MAGNESCALE MG MODULES MG41-NE Main unit Ethernet interface Main unit cc-Link interface Display unit ORDER CODE CABLES Order Code To extend the connection MG Module to digital gauge High flex extension cable 1 m To extend the connection MG Module to digital gauge High flex extension cable 3 m To extend the connection MG Module to digital gauge High flex extension cable 5 m To extend the connection MG Module to digital gauge High flex extension cable 10 m To extend the connection MG Module to digital gauge High flex extension cable 15 m Subject to change without prior notice. eddylab...

Open the catalog to page 6