Catalogs >
eddylab GmbH >
LVDT Inductive Transducer SM F14

LVDT Inductive Transducer SM F14
8Pages

Catalog excerpts

SM-F14 SERIES | LVDT Inductive transducer: Designed for integration into hydraulic and pneumatic cylinders or servo valves. ■■ Linearity up to ±0,10 % of full scale ■■ Stainless steel housing ■■ Operating pressure 150 bar ■■ Protection class IP67 or IP68 ■■ Sensor working temperature up to 200 °C ■■ Measu

Open the catalog to page 1

2 INTRODUCTION, TECHNICAL DATA I SM-F14 SERIES LVDTs (Linear Variable Differential Transformers) are inductive sensors excellent for use in harsh industrial environments, e.g. high temperature and pressure ranges, as well as high accelerations and measuring cycles. The F14 series offers ultimate reliability and precision in a small size, and is designed for industrial and lab use. The position transducer is a pressurized hydraulic model up to 150 bar for installation directly in hydraulic and pneumatic cylinders. The sensors can also be used under water because of their high protection...

Open the catalog to page 2

SM-F14 SERIES I TECHNICAL DIMENSIONS 3 Please note that the stated end travel and start travel (see detailed picture) are standard values. When calibrating the sensors we are aiming for best linearity

Open the catalog to page 3

SENSOR TYPES ■■ CABLE / CONNECTOR OUTPUT AXIAL / RADIAL Following types for cable and connector outputs are available: ■■ cable output axial: ■■ cable output radial: ■■ cable output axial: ■■ cable output radial: cable fitting and a spring for bend protection cable fitting and a spring for bend protection (page 3) Instruments with option H for temperatures up to 150 °C/ 200 °C feature a PTFE cable. For sensors with connector output the cable has to be ordered separately. You can choose from a cable with a straight connector or with an angular connector. The connector pair has a protection...

Open the catalog to page 4

If not specified otherwise the cable electronics is placed at 1 m from the end of the cable. The external electronics IMCA is designed to be installed in switch cabinets (Din-rail mounting). The 11 GND (sisna|) connection to the sensor is conducted as connector with push-in spring connection. * Terminals 1 and 7 are internaMy connected. Each sensor, manufacted by eddylab, is basically adjusted and calibrated. You will receive a traceable calibrated measurement equipment, adjusted and tested in the company's own high-end calibration laboratory, and a calibration certificate. Please note: If...

Open the catalog to page 5

The electronics by eddylab feature a built-in cable break detection. This is achieved by an impedance measurement of the LVDT's secondary coil. If the sensor cable is cut, the impedance on the secondary connections of the electronics change regardless of the push rod position, triggering the cable break detection. This feature is based on a broken secondary connection. A partial cable break of the primary connections (cables between primary coil and electronics) will not activate this function. The electronics vary in their functional range. The external electronics IMCA offers the widest...

Open the catalog to page 6

■■ FEELER FOR SPRING LOADED VERSION MATERIAL OF TASTKOPF-01 FEELER BALLS steel: for standard applications ruby: much harder and wear resistant than steel, non-conductive, for all applications except for measuring on aluminium and cast iron ceramics: comparable to ruby, best choice for measuring on aluminium and cast iron ■■ Tastkopf-01, steel (standard) ■■ Tastkopf-01-HM, cemented carbide ■■ Tastkopf-01-R, ruby ■■ Tastkopf-01-K, ■■ Tastkopf-02, steel ■■ Tastkopf-02-HM, cemented carbide ■■ Tastkopf-03, steel ■■ Tastkopf-03-HM, cemented carbide

Open the catalog to page 7

8 ORDER CODE I SM-F14 SERIES ORDER CODE SENSOR / ELECTRONICS SM X - X - X -F14- X X X X . XX ^a^ measurement ranges [mm] 2 / 5 / 10 (b) type A = free core cable/ connector KA = axial cable output KR = radial cable output SA = axial connector output M12 SR = radial connector output LEMO |d) cable / connector output S1: sensor with connector output 1 = connector output S2: sensor with cable output, open cable end (for IMCA) A = TPE cable 2 m D = PTFE-UL cable 2 m (option H) E = PTFE-UL cable 5 m (option H) F = PTFE-UL cable 10 m (option H) S3: sensor with cable output for KAB G = TPE cable 2...

Open the catalog to page 8

LVDT Inductive Transducer SM F14 8Pages

Catalog excerpts

All Eddylab GmbH catalogs and technical brochures

LVDT Inductive Transducer SM F14
8Pages