MAGNESCALE high performance counter for milling machines and lathes Content: Technical Data Technical Drawing Features Order Code - Counter for milling machines and lathes - Display resolution switching - Input signal: A/B quadrature - Machine error compensation - Models with 1, 2, or 3 axis - Reset, Preset, Restart - Data storage - Scaling function (only LH71) - Detecting reference point of measuring unit - Program function

TECHNICAL DATA MAGNESCALE Display 7 digits and minus display, color amber Connectable measuring units Series GB-ER, SJ300, SJ700A, reading head PL20C, DK digital gauge series (with cable CE29) Measuring unit input resolution Standard, linear: 0.1 μm, 0.5 μm, 1 μm, 5 μm, 10 μm; rotative: 1 s, 10 s, 1 min, 10 min Expanded: 100 μm, 50 μm, 25 μm, 20 μm, 2 μm, 0.05 μm, 1 degree Input signal A/B quadrature signal, Z signal, TTL (according to RS422) Min. input phase difference Quantization error Alarm display It is possible to store / call 3 kind of numbers Data storage The value displayed before the...

FEATURES LH70, LH71 Display resolution switching The display resolution can be selected from: linear 0.1 µm to 10 µm and diameter display. Angles: 1 second to 10 minutes The correct setting depends on the used scale and is shown in the table below: Resolution Series GB-ER by cable CE29 (sold separately) Machine error compensation The LH70/71 compensates errors arising from the inclination or deflection of a machine tool and displays the actual displacement of the machine. Thus the displayed value accords with the actual displacement of the work piece to achieve high-accuracy positioning and restoration...

FEATURES LH71 ONLY Program Write Program mode: - This lets you manually enter a program in the Edit mode. - Playback program: The program is created with the content of actual machining. Run Program Mode: - Machining procedures are displayed for each stage. - The Mirror Image function flips the data polarity for each axis. Digiruler Easy Angle Display function You can easily display the angle by pasting the Digiruler on an arc. Scaling The counter can count the actual moving distance on an enlarged or reduced scale using any multiplier within the setting range. This can compensate for shrinkage...