Catalogs >
eddylab GmbH >
DK800S Series - Magnescale ®

DK800S Series - Magnescale ®
8Pages

Catalog excerpts

Series DK800S Content: Technical Data Accessories Display Order Code Key-Features: - Available measurement ranges: 5, 12 and 30 mm - Resolution up to 0.1 pm - Linearity up to ±0.5 pm - Output signal A/ B/ reference point, TTL-Linedriver according to EIA-422 - Integrated reference point - Displacement speed up to 250 m/min - Working temperature 0...+50 °C - Protection class up to IP67 - Pneumatic versions available - Easy installation - Resistant against water and oil - Life cycle up to 130 million strokes

Open the catalog to page 1

Max. cable length (to electronics) 22 m

Open the catalog to page 2

MAGNESCALE DK812S - MEASUREMENT RANGE 12 mm Model Measurement range Max. displacement speed Output Power supply Power consumption Reference point Working temperature Storage temperature Measuring force horizontal (20°C) Vacuum function Pneumatic push function Air pressure Protection class Vibration A/ B/ reference point, TTL-Linedriver according to EIA-422 5 VDC ±5 % 1W one location at 1 mm 0...50 °C -20...60 °C 0.50 ±0.30 N, 0.70 ±0.50 N with pneumatic push type (0.55 bar) DK812SALR, DK812SAFLR, DK812SBLR, DK812SBFLR, DK812SALR5, DK812SAFLR5, DK812SBLR5, DK812SBFLR5 DK812SAVR, DK812SBVR,...

Open the catalog to page 3

MAGNESCALE DK830S - MEASUREMENT RANGE 30 mm Model Measurement range Linearity (20°C) Max. displacement speed Output 1.3 µm, air driven versions: 1.7 µm 42 m/min (on request also with 80 m/min) A/B (signal frequency 2.5 MHz / min. phase difference A/B: 100 ns) , reference point, TTL-Linedriver according to EIA-422 Power supply Power consumption Reference point Working temperature Storage temperature Versions with Air drive function Measuring force horizontal (20°C) Protection class Vibration DK830SVRB, DK830SVRB05, DK830SVRB10 0.60 ±0.35 N, air driven versions: 1.9 N at 0,7 bar, 2.6 N at 0.9...

Open the catalog to page 4

ACCESSORIES Extension cable, open end: CE22-01 (1 m), CE22-03 (3 m), CE22-05 (5 m), CE22-10 (10 m) Extension cable, high flex (for connection to display LT30): CK-T12 (1 m), CK-T13 (3 m), CK-T14 (5 m), CK-T15 (10 m), CK-T16 (15 m) Feeler-Set DZ5100: 1. Off-center contact point: 01,0 mm steel ball 2. Flat carbide contact point 0 6,5 mm 3. Plastic ball contact point 03,0 mm, nylon ball Roller DZ100: Tolerance <3 pm/turn Tastkopf-01 * * Material of the feeler balls: steel: for standard applications ruby: much harder and wear resistant than steel, non-conductive, for all applications...

Open the catalog to page 5

Connection cable CE22 with open end to PLCs, counters A/A*, B/B*, Z Connection cable CE29 to display units LY71/72 (no additional cable is needed for a connection to LT30 Extension cable CKT12...15 Digital gauge with MG Module, output by RS232 or Go/no-Go via BCD Module Extension cable CKT12...15 Type Description for connection to CE22 connection cable open end PLC, Counter, A/A*, B/B*, Z CE29 connection cable , Sub-D connector Displays, LH70/71, LG20 LY71/72 MAGNESCALE COUNTER LT30 Compatible with digital gauges of the DK and DK-S series (without additional cable)...

Open the catalog to page 6