Catalogs >
eddylab GmbH >
AX-turbo Eddy Current Probe

AX-turbo Eddy Current Probe
6Pages

Catalog excerpts

AX-TURBO|EDDY CURRENT PROBES Eddy current probes for turbo speed measurement and gap control. ■■ Measuring on turbo vanes and shafts ■■ TTL output for speed measurement ■■ Analogue monitor output for gap control ■■ High resolution ■■ High dynamics ■■ Low current consumption

Open the catalog to page 1

For more than fifteen years we have been occupied with the development and production of high-quality eddy current probes and drivers for industry and research. The eddylab sen-sorsystem AX-turbo offers precise and high-resolution eddy current measurements on compressor wheels with TTL speed output and analog monitor output for gap control. Eddy current probes are particularly suitable devices for non-contact measurements on steel, aluminium and titanium vanes. Typical applications are measurements at turbo test benches or under driving test conditions. The extremely high resolution and...

Open the catalog to page 2

AX-TURBO I TECHNICAL DATA 3 By default, the probes have a BNC plug for the connection at the eddy current probe driver. Optionally the probes are equipped with a LEMO connector. This is necessary for connection to the probe driver with protection class of IP68. ■ STANDARD VERSION WITH BNC CONNECTOR BNC connector, diameter max. 15 mm LEMO connector, diameter max. 11 mm TECHNICAL DATA PROBE DRIVER

Open the catalog to page 3

4 TECHNICAL DRAWINGS | AX-TURBO TECHNICAL DRAWINGS ■■ IP40 PROBE DRIVER WITH BNC CONNECTOR ■■ IP68 PROBE DRIVER WITH L

Open the catalog to page 4

■■ SUPPLY VIA 4-POLE M12 PLUG CONNECTOR (SOCKET) View of the unit and the soldering side of the mating connector. Pin 1 (brown) Pin 2 (white) Pin 3 (blue) Pin 4 (black) V+ speed output (pulse TTL) GND monitor output (analogue 4,5 V) For connecting the power, shielded cables in various lengths are available (see accessories). Please use only shielded supply cables and set the screen on one side (to avoid earth loops)! Note: Wrong connection of supply voltage at the output could damage the unit. ACCESSORIES Cable for power supply with mating connector M12 straight and angled - K4P Cable with...

Open the catalog to page 5

6 ORDER CODE I AX-TURBO PRECAUTIONS ■ Never shorten the probe's coaxial cable. ■ Lay the cable so that it is protected and avoid running it along objects with sharp edges. A cable that has been squashed or damaged in another manner can tamper with the signal or render the probe unusable. ■ Avoid placing the cable under tensile or torsional stress. Never turn the probes in the holders inwards or outwards without first loosening the fastenings. ■ Note the minimum bending radius for dynamic and static installation as specified in the datasheet. Avoid bending the cable. ■ Protect the plug...

Open the catalog to page 6

AX-turbo Eddy Current Probe 6Pages

Catalog excerpts

All Eddylab GmbH catalogs and technical brochures

AX-turbo Eddy Current Probe
6Pages